Connection options
This section illustrates how the IP Audio Interface can be used. A data stream can be sent and
received by the IP Audio Interface. Different connection methods can be used depending on
how the device is configured.
Unicast (point to point)
Unicast means: a single data stream to a single predefined receiver device (Partner) in a LAN
or WAN. A typical partner IP address: 192.168.100.50
Figure 5.1: Unicast example (1=LAN/WAN)
Multiple Unicast
Multiple Unicast means multiple data streams to multiple receiver devices (Partners) in a LAN
or WAN. Typical partner IP addresses: 192.168.100.50, 192.168.100.51, 192.168.100.52, etc.
Figure 5.2: Multiple Unicast example (1=LAN/WAN)
Broadcast
Broadcast means: a single data stream to all receiver devices (Partners) in a LAN. A typical
partner IP address: 192.168.100.255 configured in the transmitter as Partner address. Then all
partners with addresses starting with 192.168.100 receive this stream. Typically, routers in a
WAN do not support Broadcast mode.
Figure 5.3: Broadcast example (1=LAN/WAN)
5
5.1
5.2
5.3
14 en | Connection options IP Audio Interface
2013.03 | V2.0 | Operating Manual Bosch Security Systems B.V.
Comments to this Manuals