Bosch AutoDome 100 Series User Manual download pdf (Page 7)

AutoDome 100 Series Fixed Camera Advanced Setup | en 7

Bosch Security Systems, Inc. User Manual F.01U.216.346 | 1.0 | 2011.04

4 Advanced Setup

The VG5-100 Series camera module normally provides an optimal picture without the need for

further adjustments. Advanced setup options, however, are available for obtaining the best

results from the camera under special circumstances. There are two upper level On-Screen

Display (OSD) menus: the Main menu and the Install menu.

The Main menu allows you to select and setup the picture enhancement functions. The Install

menu allows you to set the camera ID, focus and synchronization settings. The Main and

Install menus have settings that you can select directly or open to submenus for a more

detailed setup.

4.1 Accessing and Navigating Menus

There are five (5) keys used for navigating through the various menus. To access the setup

menus, press the center Select key to open and display the Main menu. Use the four

directional keys to navigate through the menus.

Figure 4.1 Menu Keyboard and Monitor Jack

Use the menu keys to perform the following:

– To access the Main menu or to select a sub-menu item, press the center Menu Select key.

– To open the Install menu press the Menu Select key for approximately 1.5 seconds.

– To scroll up or down a menu press the Up or Down keys.

– To move through options or to set parameters, press the Left or Right keys.

NOTICE!

Active menu selections can vary depending or the combination of camera, CPU and COMM

(communication) modules used. The menu selections described in this manual are typical for

a VG5-100 Series system.

Ref Description Ref Description

1 Menu Keyboard 5 Select Button

2 Monitor Jack 6 Right Button

3 Up Button 7 Down Button

4 Left Button

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Bosch AutoDome 100 Series User Manual Page 7