Bosch D7212GV2 User Manual download pdf (Page 24)

GV2 Series Control Panels | Owner's Manual Supplement

24 Bosch Security Systems, Inc. | 2/07 | F01U063791-01

3. The user does not return to stop Entry Delay. The Entry Delay

time expires.

4. The control panel starts the alarm transmission sequence,

accompanied by an Exit Error report.

3.3.5 Master Arm − No Exit Feature (Unvacated Premises)

If a user Master Arms an area and does not leave the premises (no

Entry/Exit zones are faulted during the exit time), the control

panel’s No Exit feature automatically shifts the Area from Master

Armed to Perimeter Armed.

I have this feature.

I do not have this feature.

3.3.6 Recent Closing

If an alarm occurs within two min of the expiration of Exit Time,

the control panel creates an “alarm-recent closing” event. If the

user armed with a passcode, the user number is included in the

recent closing report.

Recent Closing events are not created for Fire Alarm events.

3.4 User-Caused False Alarms, Disarming the

System

3.4.1 Entry Time Defaults

The SIA standard requires an Entry Time of between 30 sec and

4 min. The required default is 30 sec. If the system is not

disarmed within Entry Time, the control panel creates an Alarm

Event.

During the Entry Time, the control panel sounds an Entry Delay

Tone (distinct from the alarm tone).

3.4.2 Passcode Disarms System (Area)

When the control panel is in Entry Delay, entering a valid passcode

disarms the system as soon as the last digit of the passcode is

entered. No other keys are required.

When the control panel is in Exit Delay or is armed, entry of a valid

Passcode must be followed by an [ENTER] or [ENT] key.

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

Bosch D7212GV2 User Manual Page 24