Bosch BasicDome Series Instruction Manual download pdf (Page 17)

Indoor Pendant & In-ceiling Models | Instruction Manual | Advanced Menu

Bosch Security Systems | 10 December 2003

LENS SETUP

Auto Focus – BasicDome automatically focuses on the subject in the center of the screen. The Factory Default* setting

is SPOT.

Choices:

Constant . . . . . . . . . . .Auto Focus is always active, even while moving.

Manual . . . . . . . . . . . .Auto Focus is inactive, manual focus must be used.

*Spot . . . . . . . . . . . . . .Auto Focus activates after the camera stops movement, once focused, Auto Focus is inactive

until camera is moved again.

Auto Iris – BasicDome automatically adjusts to varying light conditions. The Factory Default* setting is CONSTANT.

Choices:

*Constant . . . . . . . . . .Auto Iris is constantly active.

Manual . . . . . . . . . . . .Iris must be manually adjusted.

Auto Iris Level – Reduces the camera’s Iris reference level for proper exposure. *Indicates Factory Default setting.

Choices: . . . . . . . . . . . . . .Sliding scale from – (reduce brightness) to + (increase brightness).

Focus Speed – Adjusts the manual focus speed. The Factory Default* setting is 2.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1 (normal) to 8 (fast).

Iris Speed – Adjusts the manual iris speed. The Factory Default* setting is 5.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1 (normal) to 10 (fast).

Max Zoom Speed – Adjusts the manual zoom speed. The Factory Default* setting is FAST.

Choices: . . . . . . . . . . . . . .Fast*, Medium, and Slow.

PTZ SETUP

Autopan Speed – Adjusts speed of the camera during Auto Pan/ Auto Scan. The Factory Default* setting is 30°/second.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1°/second to 60°/second.

Tour Period – Changes dwell time between Presets during a Preset Tour. The Factory Default* setting is 5 seconds.

Choices: . . . . . . . . . . . . . .Sliding Scale from 3 seconds to 10 minutes.

PTZ Fixed Speed – Sets Pan/Tilt speed when controlled by a fixed speed controller. The Factory Default* setting is 4.

Choices: . . . . . . . . . . . . . .Sliding Scale from 1 (slow) to 15 (fast).

Inactivity – Selects the mode that the dome reverts to after the period of time specified in the Inactivity Period (next menu

option) without operator activity. The Factory Default* setting is OFF.

Choices:

*Off . . . . . . . . . . . . . . .Remains on current scene indefinitely.

Scene 1 . . . . . . . . . . .Returns to preset 1.

Prev Aux . . . . . . . . . .Returns to previous activity (previous activities include Aux commands 1, 2, 8, 50, 52).

Inactivity Period – The time period of inactivity before the above action occurs. The Factory Default* setting is 2 minutes.

Choices: . . . . . . . . . . . . . .Sliding Scale from 3 seconds to 10 minutes.

AutoPivot – AutoPivot automatically rotates the camera 180° when following a subject travelling directly beneath the

camera. The Factory Default* setting is ON.

Choices:

*On . . . . . . . . . . . . . . .Camera automatically pivots.

Off . . . . . . . . . . . . . . .Camera stops tilting when looking straight down.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Bosch BasicDome Series Instruction Manual Page 17