Bosch Vision 300 Operating User Manual download pdf (Page 26)

26 en | MIC Settings Universal Camera Setup Software

F.01U.172.623 | 1.0 | 2011.10 User Manual Bosch Security Systems, Inc.

Multi Alarm Settings

This section sets up how the MIC reacts to a given alarm input, when Multi Alarm is turned on.

For these options to do anything, the PSU must be either fitted with a Multi Alarm card (8

alarm inputs) or be an IR PSU (4 alarm inputs).

The multi alarm card provides 2 output relays which can be configured to close or open on

given alarm inputs. Relay 1 can be activated from either alarm inputs 1 to 4 or 1 to 8 and

similarly relay 2 with 5 to 8 or 1 to 8. The re-arm time is a time in seconds before the MIC

returns to its current position and returns the relay to its prior state. The options for this are

1, 5, 10 or 60 seconds. To send the settings to the MIC, select the desired options and then

click Set Relays.

5.6 Privacy Settings

Menu Path: Settings > Privacy

This section deals with the most common controls of the privacy card, creating and clearing

masks, and setting up mask colors, etc. These settings require the optional Privacy Card to be

fitted into the head of the MIC. Privacy is not available on any of the thermal MICs.

Mask / Clear Screen

These functions will add or remove a privacy mask the size of the entire current view. Moving

the MIC in Pan or Tilt should then indicate the zone clearly. This would most commonly be

used in conjunction with zoom where a window can be made full frame and then the whole

thing masked as opposed to the Mask / Clear Pixel method which may take significantly

longer.

Mask / Clear Pixel

This is a more accurate way of creating privacy masks one pixel at a time. The Pixel is created

at the center of the image, or where the crosshair points if it is visible.

Masks On / Off

This is an override setting to turn masks completely On or Off. This will not clear individual

masks settings; when Off is sent, they will disappear and then re-appear in the same positions

went On is sent.

Crosshair On / Off

Select On to display a crosshair in the middle of the video display. Use this crosshair to set

individual mask pixels with the appropriate command from below.

Show / Clear Style

This setting provides a preview of the current mask style. For the Privacy 3 units, this will only

work if the Crosshair is turned On, indicating the current style in a small privacy block to the

right of the crosshair center. With Privacy 4, a bar will appear on the top left of the video

indicating the available mask types, and a second bar below showing the currently-selected

style. Use the Set Mask Style to step through the available styles. Once the required style has

been selected, click Clear Mask Style (and Crosshair Off for Privacy 3) to return to the normal

state.

Set Crosshair

This will create a pixel sized mask as with the function above, and will also bring up the

crosshair. Click again to remove the crosshair or use Crosshair Off.

1 ... 25 26 27 ... 52

Comments to this Manuals

No comments

Bosch Vision 300 Operating User Manual Page 26

Comments to this Manuals

Related products and manuals for Security cameras Bosch Vision 300 Operating