Bosch DIP-7082-8HD Installation Guide download pdf (Page 17)

5. Accept the license terms, then click Start. Windows restarts.

6. After restart is finished, press CTR+ALT+DELETE. The Windows logon page is displayed.

7. Enter the default password WSS4Bosch.

8. After entering the password, a message is displayed that you must change the password

before logging on the first time. To confirm, click OK.

9. Change the password.

A series of scripts perform important setup tasks. This can take several minutes. Do not

turn off the computer.

The Bosch VMS default screen is displayed.

Note: In case of password loss a system recovery must be performed as described in the

installation manual. The configuration must be done from scratch or must be imported.

10. On the Bosch VMS default screen, double-click the Bosch VMS Wizard icon

to start

the Configuration Wizard.

The Welcome page is displayed.

11. Configure the system using the Configuration Wizard.

Notice!

If the IP addresses of devices that should be added don’t fall within the same IP range as the

DIVAR IP we recommend using the Bosch VMS Configuration Client. In all other cases use the

Configuration Wizard.

Notice!

To perform administrative tasks, the BVRAdmin account can be entered when Bosch VMS

default screen is displayed. To do so, press CTRL+ALT+DEL, then hold down SHIFT while

clicking the Switch User option and keep SHIFT pressed for about five seconds.

Notice!

We strongly recommend not changing any operating system settings. Changing operating

system settings can result in malfunctioning of the system.

See also:

– Using Bosch VMS Configuration Wizard, page 17

– Using Bosch VMS Configuration Client, page 28

– Additional documentation and client software, page 31

Using Bosch VMS Configuration Wizard

Intended use for Configuration Wizard is the quick and easy configuration of a smaller system.

Configuration Wizard helps you to achieve a configured system including VRM, iSCSI system,

cameras, recording profiles and user groups.

User groups and their permissions are configured automatically. You can add or remove users

and set passwords.

Configuration Wizard can access Management Server only on the local computer.

You can save an activated configuration for backup purposes and import this configuration

later. You can change this imported configuration after import.

Configuration Wizard adds the local VRM automatically.

Restrictions:

The following tasks cannot be done with the Configuration Wizard. Use Bosch VMS

Configuration Client instead.

4.4

DIVAR IP 7000 2U System setup - first steps | en 17

Bosch Sicherheitssysteme GmbH Quick Installation Guide 2014.01 | V3 | DOC

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Bosch DIP-7082-8HD Installation Guide Page 17

Comments to this Manuals

Related products and manuals for Server barebones Bosch DIP-7082-8HD