1. Open and remove the maintenance cover.
2. Carefully unscrew the pump cover - do not remove it completely.
3. Let the water drain into a shallow container (let the remainder drip
onto a floor cloth). Repeat the operation until there is no water left.
4. Remove the pump cover. Remove foreign material/fluff from inside the
pump.
5. Clean the interior, pump cover thread and pump housing
(fan impeller in the detergent solution pump must be able to rotate).
6. Refit the pump cover and screw on tightly.
7. Insert the maintenance cover and close it.
To prevent unused detergent from flowing into the outlet during the next
wash: pour 1 litre of water into dispenser II and start the Å Spin/Empty>
programme.
Filter in the water inlet hose
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Å Spin/Empty >).
3. Press Start/Reload $. Leave programme running for approx. 40 seconds.
4. Set the programme selector to Off. Pull out the mains plug.
Clean the filter:
1. Remove the hose from the tap.
Clean the filter with a small brush.
or
Remove the hose from the rear of the appliance.
Remove filter with pliers and clean.
2. Reconnect the hose and check for leaks.
1
2
1
2
– Risk of scalding. Allow detergent
solution to cool down.
– Turn off the tap.
11
Consumption values
Programme
Additional
option
Load
Electricity
consumption
**
Water**
Programme
duration
**
Cottons L 40 ॕ
Speed wash 3.5kg 0.53kwh 36 l 0:55 h
Anti-allergy ā ॕ
*
Intensive 6.0kg 0.60kwh 45 l 4:21 h
Easy care I40 ॕ
Speed wash 2.6kg 0.39kwh 45 l 0:51 h
.JY 1÷40 ॕ
Speed wash 3.0kg 0.43kwh 32 l 0:42 h
Delicate/Silk
30 ॕ
Speed wash 2.0kg 0.27kwh 35 l 0:38 h
Wool O:30 ॕ
- 2.0kg 0.22kwh 35 l 0:43 h
* Programme setting for testing and energy labelling in accordance with GB standard.
** The values may deviate from the indicated values depending on water pressure, hardness, and
inlet temperature, ambiente temperature, type, amount and soiling of the laundry, detergent used,
fluctuations in the power supply and selected additional functions.
Fault displays
E:17
– Tap turned on?
– Water inlet hose kinked or jammed?
– Filter blocked? Clean filter a Page 10
– Water pressure too low?
E:18
– Loose debris is blocking the pump, clean the pump a Page 10
– Drainage hose blocked?
Other displays
Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call customer service.
(2 pages)
(68 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals