Bosch EX36 Installation Manual download pdf (Page 11)

EX36-IP | en 9

Bosch Security Systems Quick Install MAN36IPB Rev.0 | 2008.10

3.) Launch Configuration Manager or web-browser.

2. 4 Camera-directional adjustments

Both the camera and the LED array can be adjusted for optimum

picture quality. The camera lens can be tilted on its axis via two

adjustment screws on the mounting bracket. It can also be moved

closer or farther away from the viewing window. Connect the Ethernet

and power wires. Mount the Camera/LED Array Assembly into the

housing. Check the picture for quality and directional alignment.

Remove the Camera/LED Array Assembly if an adjustment is

required to the camera’s viewing angle or picture quality.

Loosen both adjustment screws for tilt or horizontal directional

alignment. This action may require trial-and-error attempts to obtain

perfect picture alignment.

2.5 Camera re-assembly

Make sure all wires are properly connected, all holes are sealed

against moisture penetration, and all mounting screws are tight.

1.) Slide the lens foam over the camera lens. Make sure the foam is

snug and as close to the faceplate viewing window as possible and

the photocell is secure with an unobstructed view.

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Bosch EX36 Installation Manual Page 11