Bosch CTL636ES1 Instruction Manual download pdf (Page 52)

48

Robert Bosch Hausgeräte GmbH

en

● Press the water lter rmly into the

opening of the water tank�

● Fill the water tank with water up to the

“max” mark�

● Remove the milk tube from the milk

container and close the door�

F

Caution: Do not jam the tube when

closing the door�

● Place a container with a capacity of

0�5 litre under the outlet �

● Press C�

Water will now ow through the lter to

rinse it�

● Then empty the container�

The appliance is ready for use again�

F

Rinsing the filter simultaneously

activates the setting for the change

filter display�

The lter is no longer effective when the

“Replace water filter– Press A” display

appears, or at the latest after two months� It

needs to be replaced for reasons of hygiene

and to prevent a build-up of limescale

(which could damage the appliance)�

● If a new lter is not inserted, select the

setting [ remove ] and press C�

The message “Remove filter, reinsert

watertank, close door” appears�

F

If the appliance has not been used

for a prolonged period (for example,

while you are on holiday), the

existing filter should be rinsed before

the first time the appliance is used

again� To do this, simply dispense a

cup of hot water�

Detailed information about the water lter

can be found in the manual supplied with

the lter.

Switch off after

To set how long the appliance should wait

after the last drink was prepared before it

automatically rinses and switches itself off�

You can specify values from 15 minutes to

8 hours� The factory setting is 30 minutes�

Illumination

Setting the illumination of the beverage

outlet� “on ”, “when in use” or “off” can be

selected�

Brightness illumination

Setting the illumination lightness of the

beverage outlet� “Level 1” to “Level 10” can

be selected�

Brightness display

Setting the illumination lightness of display�

Key tones

Switch the signal tones on or off�

Clock displ.

Display option for time Off or Digital (on)�

The setting for this can be changed in the

Clock menu option�

F

If the appliance is switched off at

the mains or there is a power failure,

the settings for the time will be lost�

Clock

Setting for the current time�

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 131 132

Comments to this Manuals

No comments