54
Robert Bosch Hausgeräte GmbH
en
● Close the appliance door�
● Place a container with a capacity of
0�5 litre under the beverage outlet�
● Press C� The cleaning programme will
now run for about 5 minutes�
● Remove the container, empty the drip trays,
replace and close the appliance door�
● Press C. The appliance has nished
cleaning and is ready for use again�
● Touch E to exit the program�
Calc‘nClean
Takes about 26 minutes�
Calc’nClean combines the functions
Descale and Clean� If both programmes
are due to be carried out close together, the
fully automatic coffee machine will automat-
ically suggest this service programme�
● Touch E�
● Touch [ Calc'nClean ] to select the
programme�
● The display indicates the progress
of the programme�
● Clean the beverage outlet and replace,
empty the drip trays and replace�
● Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
● Remove the water lter (if there is one)
and press C
● Pour lukewarm water into the empty
water tank up to the “0�5 l” mark and
then dissolve one Bosch descaling tablet
TCZ8002 in it� For the TCZ6002 you
should always dissolve two tablets�
F
If there is not enough descaling
solution in the water tank, you will be
asked to do the following� Refill using
uncarbonated water and press C
again�
● Remove the milk tube from the milk
container and x the connecting part to
the right side of the beverage outlet with
the magnet�
● Close the appliance door�
● Place a container with a capacity of
0�5 litre under the beverage outlet�
● Put the end of the milk tube into the
container�
● Press C�
The programme will now run for about
19 minutes�
● Remove the container and press C�
● Rinse the water tank and (if removed)
replace the water lter.
● Fill the tank with fresh water up to the
“max” indicator�
● Replace the water tank and close the
door�
● Place the container underneath the
beverage outlet again�
● Put the end of the milk tube into the
container�
● Press C�
The programme will now run for about
7 minutes and rinse the appliance�
● Remove the container, empty the drip
trays, replace and close the appliance door�
● Press C� The appliance is descaled,
cleaned and ready for use again�
● Touch E to exit the program�
Special rinsing
F
Important: If any of the service
programmes is ever interrupted, for
instance by a power failure, please
proceed according to the information
on the display:
● Rinse the water tank and rell it with fresh
water up to the “max” mark�
● Press C� The programme will now
run for about 2 minutes and rinse the
appliance�
● Empty the drip trays, replace and close
the appliance door� The appliance is
ready for use again�
● Touch E to exit the program�
Comments to this Manuals