Bosch CTL636ES1 Instruction Manual Page 57

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 56
53
CTL636E.. | 07/2014
en
F
Important:
Before starting each service program
(Descale, Clean or Calc’nClean)
remove the brewing unit, clean as
instructed and replace it�
Be careful not to jam the milk tube
when closing the door
After completion of each service
programme, wipe the appliance
immediately with a soft, damp cloth
to remove any residues from the
descaling and cleaning solution� It is
possible for corrosion to form under-
neath such deposits�
New sponge cloths may contain
salts� Salts can cause rust film on
stainless steel and must therefore be
washed out thoroughly before use�
Clean the beverage outlet, milk tubes
and connecting piece thoroughly
F
Specially developed, suitable
descaling and cleaning tablets are
available from retail outlets or from
customer services (see the section
Accessories”)�
Descaling
Takes about 21 minutes�
Touch E
Touch [ Descale ] to select the
programme�
The display indicates the progress
of the programme�
Empty drip trays and replace�
Remove the water lter (if there is one)
and press C
Pour lukewarm water into the empty
water tank up to the “0�5 l” mark and
then dissolve one Bosch descaling tablet
TCZ8002 in it� For the TCZ6002 you
should always dissolve two tablets�
F
If there is not enough descaling solu-
tion in the water tank, you will be asked
to do the following� Refill using uncar-
bonated water and press C again�
Remove the milk tube from the milk
container and x the connecting part to
the right side of the beverage outlet with
the magnet�
Close the appliance door
Place a container with a capacity of
0�5 litre under the beverage outlet�
Put the end of the milk tube into the
container
Press C� The descaling programme will
now run for about 19 minutes�
Remove the container and press C
Rinse the water tank and (if removed)
replace the water lter.
Fill the tank with fresh water up to the
“max” indicator
Replace the water tank and close the door.
Place the container underneath the
beverage outlet again�
Put the end of the milk tube into the
container
Press C� The descaling programme will
now run for about 2 minutes and rinse the
appliance�
Remove the container, empty the drip
trays, replace and close the appliance door
Press C. The appliance has nished
descaling and is ready for use again�
Touch E to exit the program�
Cleaning
Takes about 5 minutes�
Touch E
Touch [ Clean ] to select the programme�
The display indicates the progress
of the programme�
Clean the beverage outlet and replace,
empty the drip trays and replace�
Open the ground coffee drawer, drop in
a cleaning tablet and close the coffee
drawer again�
Page view 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 131 132

Comments to this Manuals

No comments