Bosch DIW116750 Installation Manual download pdf (Page 28)

Installation

08. Screw the extractor hood tightly onto the

support frame (4 screws).

 If the extractor hood is going to be

operated in recirculating mode.

❑

Before mounting the chimney cover

panels, attach the enclosed adhesive

sealing strips around the air outlet slits.

❑

If the extractor hood does not line up

properly, loosen the 4 screws in the

ceiling and adjust the position within

the elongated holes.

Following this adjustment, ensure that

the screws are tightened again.

09. Connect the air outlet pipe.

10. Connect the hood to the electricity

supply.

11. Remove the protective ﬁlm from the

two ﬂue ducts.

 Take care not to damage the

stainless steel surfaces which are

susceptible to scratches etc.

12. Insert both sections of panelling into

the extractor hood, push them up

against the support frame and secure

them in place with 2 screws at the side.

. 4

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 99 100

No comments

Bosch DIW116750 Installation Manual Page 28