Bosch DWB77CM50 Installation Manual download pdf (Page 14)

en Installation

5Installation

Instal l ati on

Preparing the installation

Caution!

Ensure that there are no electrical wires, gas pipes or

water pipes in the area where holes are to be drilled.

1. Mark a vertical centre line on the wall from the

ceiling to the lower edge of the extractor hood.

2. Use the enclosed template to mark the positions for

the screws and the outline of the attachment area.

3. Drill five 8 mm diameter holes to a depth of 80 mm

for fastening the appliance and press in the wall

plugs flush with the wall.

Installation

1. Screw on the fixing bracket for the flue duct. ¨

2. Screw on brackets for the extractor hood hand-tight.

Do not firmly tighten the screws. ©

3. Screw in the threaded bolt, leaving it protruding out

of the wall by 5–9 mm. ª

[

PP

PP

PP

PP

PP

[

NJONN

NBYNN

1 2 ... 9 10 11 12 13 14 15 16

No comments

Bosch DWB77CM50 Installation Manual Page 14