Bosch SGE63E06UC/51 User Manual download pdf (Page 7)

Electrical Supply

The customer has the responsibility of ensuring that the

dishwasher electrical installation is in compliance with all

national and local electrical codes and ordinances. The

dishwasher is designed for an electrical supply of 120V,

60 Hz, AC, connected to a dishwasher-dedicated, properly

grounded electrical circuit with a fuse or breaker rated for 15

amps. Electrical supply conductors shall be a minimum #14

AWG copper wire rated at 75°C (167°F) or higher.

Grounding Instructions

The dishwasher must be properly grounded before

operating. This appliance must be connected to

a grounded metal permanent wiring system, or an

equipment grounding conductor must be run with the circuit

conductors and connected to the equipment grounding

terminal or lead on the dishwasher. Make sure that the

dishwasher is connected to a suitable ground in compliance

with all local codes or, in the absence of a local code, with

the NATIONAL ELECTRICAL CODE in the United States or

the CANADIAN ELECTRIC CODE C22.1-latest edition in

Canada as well as any provincial/state or municipal or local

codes that apply.

Electrical Connection

The dishwasher electrical supply junction box and dedicated

receptacle must be mounted in an accessible cabinet

adjacent to the dishwasher (do not mount the junction box

or receptacle behind the dishwasher). You will need a

” x 2” (108 x 51mm) opening throught the cabinet in

order to pass the junction box through (see Figure 4). If the

opening is made through wood, sand it smooth. If the opening

is made through metal, use the included protective grommet

or other approved method to protect wiring from damage.

The electrical supply can

be connected in two ways:

Method A - Three prong plug and receptacle

Use the included three-prong plug and junction box to

connect to a dedicated household receptacle. Make sure

the household receptacle meets the electrical supply

requirements as well as national and local codes.

ELECTRICAL PREPARATION

Avoid Electrical Shock Hazard

Do not work on an energized circuit. Doing so

could result in serious injury or death. Only

    

work. Do not attempt any work on the dishwasher

electric supply circuit until you are certain the

circuit is de-energized.

Avoid Fire Hazard

Make sure electrical work is properly installed.



electrical work.

WARNING

Avoid Fire Hazard

Make sure there are no loose electrical connections.

Make sure all electrical connections are properly

made.

WARNING

Dishwasher Electrical Rating

Volts Hertz Amperes Watts

120 60 15

1,450

(max)

Dedicated

Receptacle or

Field Wiring

Dishwasher

Electrical Supply

Junction Box

Electric cord with

junction box and

three prong plug

are included

with dishwasher

Figure 4

Figure 5

CLICK

Electrical Preparation

300

1 2 3 4 5 6 7 8 9 10 11 12 ... 38 39

Comments to this Manuals

No comments

Bosch SGE63E06UC/51 User Manual Page 7

Comments to this Manuals

Related products and manuals for Dishwashers Bosch SGE63E06UC/51