Bosch SGE63E06UC/51 User Manual download pdf (Page 9)

Water Supply Shut Off Valve

Install an easily accessible shut-off valve (not supplied) in

the hot water supply line, as shown in Figure 7. All solder

connections must be made before the water line is connected

to the dishwasher.

Connecting the Hot Water Supply

There are two plastic corrugated hoses that exit the back of



end, is the water supply hose to the dishwasher (the other

hose is the dishwasher drain hose). You will need a 3” x 1

”

(76 x 45mm) opening through the cabinet to pass the dish-

washer water supply line through toward the shut off valve.

To connect the hot water supply:

1. Assemble the water supply adaptor fitting from the

parts bag onto the dishwasher water supply hose. This



       

adaptor through the opening toward the water shut off

valve. Take care not to allow the hose to kink or twist

behind the dishwasher.

3. Connect the dishwasher water supply line with adaptor to

the water shut off valve. You will need to use an approved



this connection. Always use the appropriate seal when

making plumbing connections.

NOTE: The end of the dishwasher water inlet hose is

heavy and will need to be supported. It is best to lay the

Figure 7.

4. After all connections are made, turn on the hot water and

check for leaks.

The dishwasher drain hose may be connected to the house-



a 1

” diameter hole in order to pass the drain hose through

the cabinet.

1 Directly to the undersink dishwasher drain connection, as

shown in Figure 8.

2 Directly to a disposer dishwasher drain connection, as

shown in Figure 9.

3 To the undersink dishwasher drain connection through an

air gap, as shown in Figure 10.

4 To a disposer dishwasher drain connection through an air

gap, as shown on Figure 11.

IMPORTANT NOTES:

· If local ordinance require an air gap, install it according

to the manufacturer’s instructions.

· If the dishwasher drain hose is to be connected to a

disposer dishwasher drain connection, remove the plug

from the disposer’s dishwasher drain connection.

· The dishwasher drain hose must have one place along

its length that is securely attached 20 inches above the



· The drain hose length can be extended if necessary. The

maximum length of the drain hose, including the hose

leading to the air gap, is 150 inches.

Dishwasher

Water Inlet

Hose

Water

Shut Off

Va lve

110-120V

Figure 7

Figure 10 Figure 11

Figure 8

Non-Metallic Tie

MIN.

20"

MIN.

20"

Non-Metallic Tie

Figure 9

Remove

plug

Drain Connections

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 38 39

Comments to this Manuals

No comments

Bosch SGE63E06UC/51 User Manual Page 9

Comments to this Manuals

Related products and manuals for Dishwashers Bosch SGE63E06UC/51