Bosch SME88TD01E Instruction Manual download pdf (Page 29)

Operating the appliance en

29

Ï intensiveZone *

intensiveZone

Perfect for a mixed load. You can wash

very soiled pots and pans in the lower

basket together with normally soiled

utensils in the upper basket. The spray

pressure in the lower basket

is intensified, the rinsing temperature

is increased slightly.

¿ extraDry *

extraDry

An increased temperature during the

final rinse and an extended drying

phase ensure that even plastic parts dry

better. There is a slight increase in the

energy consumption.

ß Energy Save *

Energy Save

The “Energy Save” function can be

used to reduce water and energy

consumption. The running time

is extended for optimum cleaning and

drying results.

1 Operating the

appliance

Operating the appliance

Programme data

The programme data (consumption

values) can be found in the summary

of instructions. They refer to normal

conditions and the water hardness set

value °E 16 - 20 medium. Different

influencing factors such as water

temperature or line pressure may result

in deviations.

Changing the settings

The dishwasher has been preset with

certain settings for your convenience.

You can change these factory settings.

Change the setting as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Press Info button {8 for 3

seconds until the following text is

indicated on the display window at

the top @:

Scroll with < >

Set with - +

Leave with Setup 3 sec.

4. Keep pressing button >)* until the

required setting is indicated on the

display window at the top @.

5. Make the setting with setting buttons

+ -X.

6. Press and hold the Info button {

8 for 3 seconds.

The chosen setting has now been

stored.

Tip: If you change several settings, first

make all changes in succession. Now

press the Info button { 8 for

3 seconds. This saves all set values in

the appliance.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Comments to this Manuals

No comments