Bosch SME88TD01E Instruction Manual download pdf (Page 30)

en Operating the appliance

30

Opening the door

To open the door, press the upper

middle part of the door. The appliance

opens automatically.

If you have activated the child-proof

lock, press twice in quick succession at

the top of the door in the middle.

AquaSensor *

AquaSensor

* depending on the features of your

dishwasher

The Aqua sensor is an optical

measuring device (light barrier) which

measures the turbidity of the rinsing

water.

The AquaSensor is used according

to the programme. If the AquaSensor is

active, “clean” rinsing water can be

transferred to the next rinse bath and

water consumption can be reduced by

3–6 litres. If the turbidity is greater,

the water is drained and is replaced

with fresh water. In the automatic

programmes the temperature

and running time can also be adjusted

to the degree of soiling.

Time display

The running time is determined during

the programme by the water

temperature, the number of utensils as

well as the degree of soiling and may

vary (depending on the selected

programme). You can change the time

display in time or hours/minutes so that

the remaining running time of the rinsing

progamme appears in the display

window “Ready at” (for example 15:20

hours) or “Ready in” (for example 3:25).

Sensor setting

The programme sequence is optmised

in Auto programmes with the aid of

sensors. The sensors adjust the

programme strength of Auto

programmes depending on the amount

and type of soiling. You can adjust the

sensitivity of the sensors in 3 stages.

Standard: This setting is ideal for a

mixed load and heavily soiled utensils,

but also saves energy and water.

Sensitive: This setting adjusts the

programme strength for the effective

removal of food remnants, even if the

amount of soiling is low. The energy and

water consumption is adjusted

accordingly.

Very sensitive: This setting adjusts the

programme strength for difficult

conditions of use, for example firmly

dried on food remnants. This setting is

recommended if using biological or eco

detergents which contain lower

amounts of active agents. The energy

and water consumption is adjusted

accordingly.

extraDry

The final rinse uses a higher

temperature which improves the drying

result. The running time may increase

slightly. (Caution if utensils are delicate!)

You can switch the extraDry function on

or off.

Note: When ExtraDry function is

switched on, Eco drying is deactivated.

Eco forecast

When Eco forecast is activated, the

average water and energy consumption

of the selected programme is briefly

displayed on the display window at the

top @.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

Comments to this Manuals

No comments