Bosch CSG15 Use and Care Manual download pdf (Page 7)

REMOVING AND INSTALLING

GRINDING WHEELS

1. Depress the spindle lock button to

prevent the wheel form rotating.

2. Loosen the lock nut with the wrench

provided, and remove lock nut and dry

diamond cup wheel (fig. 2).

3. Clean backing flange, spindle, lock nut,

and guard with brush insert.

4. Place new dry diamond cup wheel onto

the spindle. Depress spindle lock and thread

lock nut onto spindle, and securely tighten

lock nut with the wrench provided.

-7-

Assembly

BACKING

FLANGE

REPLACING BRUSH INSERT

1. With the dry diamond cup wheel

mounted, locate separation in brush insert.

2. Carefully begin prying and lifting brush

insert where separation begins, with a flat tip

screwdriver and remove brush insert (Fig. 3).

3. Carefully press new brush insert into

recess in guard until it stops on shoulder of

guard.

NOTE: Always be sure that the bristles on

the brush insert are not lying in the recess,

when installing the brush insert.

WHEEL

GUARD

WHEEL

GUARD

BRUSH

INSERT

DRY

DIAMOND

CUP WHEEL

LOCK NUT

LOCK NUT

WRENCH

FIG. 2

FIG. 3

SPINDLE

BM 3609929777 1/02 1/3/02 1:16 PM Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments