Bosch C1210ES Specifications Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 64
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4 | Key to symbols and safety instructions
C 1210 ES/ESC6 720 644 887 (2014/11)
Risk of scalding at the hot water draw-off point
When the water heater is in operation, temperatures in excess of
122 °F (50 °C) can occur. To limit the temperature at the tap, install
a thermostatic DHW mixing valve.
Water heated for washing the laundry, dishes and for other cleaning
purposes can cause scalding and permanent injuries.
Children, elderly, and handicapped persons are more likely to be
permanently injured by hot water. Never leave such individuals in the
tub or shower unattended under any circumstances. Children must
not be allowed to operate hot water faucets themselves or to fill a
bathtub.
If the building has occupants in the above groups who operate hot
water faucets, or state laws / local ordinances stipulate specific
water temperatures, take the following precautions:
Use the lowest possible temperature setting.
To prevent scalding, install a tempering device, such as an
automatic mixing valve, at hot water tap or water heater. Select
and install the automatic mixing valve in accordance with the
valve manufacturer's recommendations and instructions.
Water exiting from drain valves can be extremely hot. To avoid
injuries:
Check that all connections are tight.
Direct exiting water away from people.
Measures must be taken to protect against excessive temperature
and pressure! Installation of a T&P safety valve is required.
To protect against corrosion and ensure compliance with the rules for
electrical safety, observe the following points:
Use metal fittings for potable water heating systems with plastic
piping.
Use only original accessories from the manufacturer.
When installation of the water heater is complete, inspect the ground
conductor (including metal fittings).
Maintenance
Customers are advised to:
Sign a maintenance and inspection contract with an authorized
contractor. Inspect and maintain the water heater as necessary on a
yearly basis. Service as needed.
Use only genuine spare parts.
Flooding
After a flood, do not use the appliance if any part has been
submerged. Damage to appliances that have been submerged can be
quite severe and pose numerous safety risks.
Every appliance that has been submerged must be replaced.
Page view 3
1 2 3 4 5 6 7 8 9 ... 63 64

Comments to this Manuals

No comments