Bosch B36ET71SN Owner's Manual download pdf (Page 16)

 Select screws according to the thickness of the wooden

beam: length = min. 2.5 x beam thickness, diameter #12

or #14.

According to the subsurface:

 Locate wall studs near the rear panel of the cavity and

mark drill holes in the beam

 Fasten suitable dowel into the rear wall.

 Predrill the wooden beam.

 Attach the wooden beam to the rear panel of the cavity.

7. Preparing to connect the water

(only for appliances which require a water connection)

 Attach the connecting pipe to the shut-off valve

according to the instructions supplied by the

manufacturer of the ice maker installation kit.

 Install the connecting pipe. Always observe the

indicated gap dimensions to prevent damage to the

connecting pipe when pushing in the appliance.

 Attach the connecting pipe to the floor with adhesive

tape.

8. Attaching the edge protection

 To protect the corners of the installation cavity, attach

the supplied protective brackets with adhesive tape.

NOTE

Specify the number of screws according to the cavity

width, thereby ensuring that the beam can be atta-

ched securely.

CAUTION

Turn off the main water tap to prevent damage caused

by leaking water.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

No comments

Bosch B36ET71SN Owner's Manual Page 16