Bosch DHD User Manual download pdf (Page 3)

Page 1

SAFETY INSTRUCTIONS

A. Installation work and electrical wiring must be done

by qualified person(s) in accordance with all appli-

cable codes and standards, including fire-related

construction.

B. Sufficient air is needed for proper combustion and

exhausting of gases through the flue (chimney) of

fuel burning equipment to prevent backdrafting.

Follow the heating equipment manufacturer's

guideline and safety standards such as those

published by the National Fire Protection Associa-

tion (NFPA), and the American Society for Heating,

Refrigeration and Air Conditioning Engineers

(ASHRAE), and the local code authorities.

C When cutting or drilling into wall or ceiling, do not

damage electrical wiring and other hidden utilities.

D. Ducted fans must always be vented to the outdoors.

E. Always unplug or disconnect the downdraft from the

power supply before servicing.

F. This unit is designed for indoor use only. Use this

unit only in the manner intended by the manufac-

turer.

WARNING

CAUTION: For general ventilating use only. Do

not use to exhaust hazardous or explosive materi-

als and vapors.

To reduce risk of fire and to properly exhaust air,

be sure to duct air outside. Do not vent exhaust

air into spaces within walls, ceilings, attics, crawl

spaces or garages.

TO REDUCE THE RISK OF FIRE, USE ONLY

METAL DUCT WORK.

To reduce the risk of fire, electric shock and injury

to persons, ventilator assemblies, All DHD models

must be installed with integral blower, model

DHG601DUC or remote blower models

DHG6003UC or DHG1003UC. Other ventilator

blowers cannot be substituted.

To reduce the risk of fire or electric shock, do not

use the fan with any solid-state speed control

device.

This appliance has been found to be in compli-

ance with UL507 Standard for Electric Fans and

CAN/CSA-22.2 No. 113 Canadian Standard doe

Fans and Ventilators. It is the responsibility of the

owner and the installer to determine if additional

requirement or standards apply in specific installa-

tions.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

Parts Needed

• Blower (Remote or Integral)

• Tape Measure

• Phillips Head Screwdriver

• Duct Tape

• Ductwork (configuration varies depending on location;

See pages 4-7 for further information)

• Additional Sheetmetal screws (as necessary for

ductwork installation)

• Transition(s) (style varies depending on ductwork)

Transition box for remote blower installations is available

as an accessory.

• Saw (or equivalent for cutting countertop)

• #8 x 1 1/4" Wood Screws (4)

Parts Supplied

• Downdraft assembly (1)

• #8 Sheetmetal Screws (8)

• Blower Cord Traction Relief (1)

• Hardware for brackets on vent (2)

• Remote Blower Pigtail

This unit is manufactured for indoor use only. Do not use

this unit outdoors.

Read All Instructions Before Using the Appliance.

READ AND SAVE THESE INSTRUCTIONS

1 2 3 4 5 6 7 8 ... 41 42

Comments to this Manuals

No comments

Bosch DHD User Manual Page 3

Comments to this Manuals

Related products and manuals for Kiln Bosch DHD