Bosch GIM 60L Specifications download pdf (Page 15)

English | 15

Bosch Power Tools 1 618 C00 62X | (27.8.12)

Display Elements

a Alignment aides

b Reading

c Audio signal indicator

d Battery low indicator

e Indicator for changed zero point

f Unit of measure

Technical Data

Assembly

Inserting/Replacing the Battery

The measuring tool has two separate electric circuits: The grade measure-

ment and display are powered by a different battery than the laser.

Alkali-manganese batteries are recommended for the measuring tool.

f Remove the batteries from the measuring tool when not using it for

extended periods. When storing for extended periods, the batteries

can corrode and discharge themselves.

Inserting/Replacing the Battery for Grade Measurement

Carefully remove the battery lid 7 with the battery holder from the measur-

ing tool. Pay attention that neither the connection cables of the battery nor

the battery lid become damaged. Damage on the supporting surfaces of the

battery compartment 7 can lead to faulty measurements.

Connect the battery to the battery tray observing the correct polarity. Insert

the battery lid with the battery tray into the measuring tool in such a manner

that the connection cables are not pinched.

When switching on the grade measurement for the first time after changing

the battery, all display elements light up for 1 s and an audio signal sounds.

All saved settings (measuring mode, set unit of measure) are deleted when

changing the battery.

When the battery low indicator d lights up, the battery must be replaced.

Inserting/Replacing the Batteries for the Laser

Fold out the battery lid 20 and insert the batteries. When inserting, pay at-

tention to the correct polarity according to the representation on the inside

of the battery lid.

When the laser no longer lights up, the batteries must be replaced.

Digital level GIM 60 L

Article number

3 601 K76 300

Measuring range

0–360° (4x90°)

Measuring accuracy

–0°/90°

–1°–89°

± 0.05°

± 0.2°

Working range of laser

30 m

Levelling accuracy of laser

± 0.5 mm/m

Clearance of laser exit – bottom edge of

measuring tool

24 mm

Laser class

Laser type

635 nm, <1 mW

Laser beam diameter (at 25 °C) approx.

– at 5 m distance

– at 10 m distance

3.5 mm

6mm

Operating temperature

–10 °C...+50 °C

Storage temperature

–20 °C...+70 °C

Relative air humidity, max.

90 %

Tripod mount

1/4"

Batteries

– Grade measurement

– Laser operation

1x9V6LR61

2x1.5VLR03 (AAA)

Operating life time, approx.

– Grade measurement

– Laser operation

300 h

20 h

Weight according to EPTA-Procedure 01/2003

0.9 kg

Dimensions (length x width x height)

600x27x59mm

1) The working range can be decreased by unfavourable environmental conditions

(e.g. direct sun irradiation).

The measuring tool can be clearly identified with the serial number 23 on the type plate.

OBJ_BUCH-1628-002.book Page 15 Monday, August 27, 2012 12:22 PM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 221 222

Comments to this Manuals

No comments

Bosch GIM 60L Specifications Page 15

Comments to this Manuals

Related products and manuals for Measuring & layout tools Bosch GIM 60L