Bosch GOP Professional 300 SCE User Manual download pdf (Page 14)

14 | English

2 609 932 802 | (11.7.11) Bosch Power Tools

f Wear protective gloves when changing application

tools/accessories. Application tools/accessories become

hot after prolonged usage.

f Do not scrape wetted materials (e.g. wallpaper) or on

moist surfaces. Penetration of water into the machine in-

creases the risk of an electric shock.

f Do not treat the surface to be worked with solvent-con-

taining fluids. Materials being warmed up by the scraping

can cause toxic vapours to develop.

f Exercise extreme caution when handling the scraper.

The accessory is very sharp; danger of injury.

f Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an au-

thorised customer service agent. The replacement plug

should have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only: Use a residual current

device (RCD) with a rated residual current of 30 mA or less.

Product Description and

Specifications

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and

instructions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for sawing and cutting wooden mate-

rials, plastic, gypsum, non-ferrous metals and fastening ele-

ments (e.g., unhardened nails, staples). It is also suitable for

working soft wall tiles, as well as for dry sanding and scraping

of small surfaces. It is especially suitable for working close to

edges and for flush cutting. Operate the power tool exclusive-

ly with Bosch accessories.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 On/Off switch

2 Thumbwheel for orbit frequency preselection

3 Venting slots

4 Tool holder

5 Handle (insulated gripping surface)

6 Plunge saw blade*

7 Clamping bolt with spring washer (GOP 250 CE)

8 Allen key

9 Adapter for tool holder (GOP 250 CE)

10 Sanding plate*

11 Sanding sheet*

12 SDS lever for releasing the application tool

(GOP 300 SCE)

13 Adapter for SDS tool holder (GOP 300 SCE)

14 Clamping bolt for tool adapter (GOP 300 SCE)

15 Felt ring of the dust extraction*

16 Retaining clip of the dust extraction*

17 Vacuum connection*

18 Dust extraction*

19 Vacuum hose*

20 Extraction adapter*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Multi-Cutter GOP 250 CE

Professional

GOP 300 SCE

Professional

Article number

3 601 B30 0.. 3 601 B30 5..

Preselection of orbital stroke rate

z z

Rated power input

W250300

Output power

W150180

No-load speed n

min

-1

8000–20000 8000–20000

Oscillation angle, left/right

°1.41.4

Weight according to EPTA-Procedure 01/2003

kg 1.5 1.6

Protection class

/II /II

The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

OBJ_BUCH-1271-003.book Page 14 Monday, July 11, 2011 10:01 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 202 203

Comments to this Manuals

No comments

Bosch GOP Professional 300 SCE User Manual Page 14

Comments to this Manuals

Related products and manuals for Power tools Bosch GOP Professional 300 SCE