Bosch MRP23EVS Specifications download pdf (Page 12)

-12-

MRP01 Plunge Base Preparation

INSTALLING MOTOR IN PLUNGE BASE

1. Release the base clamp lever.

2. Line up the MOTOR-TO-BASE 5V

CONTROL CONNECTION TRACK with the

slot in the plunge motor carriage and slide

the motor all the way into the carriage.

3. Motor will first slide past the base’s motor

release button catch.

4. Re-clamp the motor by pressing base

clamp lever into closed position.

REMOVING MOTOR FROM

PLUNGE BASE

4. Hold router in horizontal position, open

base clamp lever, and pull motor upwards

until it stops.

5. Press secondary motor-release button and

pull motor out of plunge motor carriage.

PLUNGE BASE DEPTH ADJUSTMENT

BASE PLUNGING ACTION

The MRP01 plunge feature simplifies depth

adjustments and will allow the cutting bit to

easily and accurately enter the workpiece.

To lower the router:

Push plunge lock lever to the left, apply

downward pressure until you reach desired

depth, and release pressure on lever to lock

(Fig. 9).

The plunge lock lever is spring loaded and

returns automatically to the locked position.

To raise the router:

Push plunge lock lever to the left, release

pressure on router and the router will

automatically retract the bit from the workpiece.

It is advisable to retract the bit whenever it is

not engaged in work piece.

R

elease Base

Clamp Lever

Motor Release

Button

Fine

Adjustment

Knob

SLIDE MOTOR

IN BASE

FIG. 8

FIG. 9

Plunge

Lock

Lever

BM 2610004573 07-09:BM 2610004573 04-09 9/4/09 7:07 AM Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

Comments to this Manuals

No comments