Bosch D7212GV2 User Manual download pdf (Page 15)

GV2 Series Control Panels | Owner's Manual Supplement

Bosch Security Systems, Inc. | 2/07 | F01U063791-01 15

7. The first sub-function that appears is CYCLE DOOR?. You can

cycle through the three sub-functions by pressing [PREV] and

[NEXT].

On a D1260 Keypad

1. Ensure that the display shows idle disarmed text.

2. Press the [COMMAND] key. The display shows SYSTEM

COMMAND.

3. Press [4] and [6].

You can use the function list in place of steps 2 and 3 to

start this function.

1. Press the [Menu>] soft key to enter the function list.

2. Press [Next>] repeatedly until you reach the DOOR

CTRL? prompt.

3. Press the [Door Control ? >] soft key.

4. All authorized door control function sub-functions are listed.

Press the corresponding soft key to enter the sub-function.

2.9.3 Cycle Door?

1. To unlock an access door briefly and allow a person into an

area, press [ENT] at the Cycle Door? prompt.

The display shows CYCLE 1 2 3 4 5 6 7 8 if all doors are in

a normal state and available. If a door is not in a normal state,

the number of the door is replaced with one of the symbols

indicated in Table 3.

Table 3: Key to Symbols

Symbol Description

--- Door is not active, not in scope, or user does not have

access level authority

C Door is timed door sequence

U Strike and shunt are latched active (held open)

X Strike and shunt are deactivated (secured)

P There is a problem with the door; call your security

company

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

Bosch D7212GV2 User Manual Page 15