Bosch D7212GV2 User Manual download pdf (Page 19)

GV2 Series Control Panels | Owner's Manual Supplement

Bosch Security Systems, Inc. | 2/07 | F01U063791-01 19

2.11 Add/Change User - [COMMAND 56]

2.11.1 Description

Use this function to add or change a passcode or card without

assistance from your security company. Before adding or changing

a passcode or card, you must know which user numbers are

available, the authority level you want to assign to the new user,

and the areas in which the passcode or card are valid.

I have this feature.

I do not have this feature.

2.11.2 Using Add User ?

1. Ensure that the display shows idle disarmed text.

2. Press the [COMMAND] key. The display shows SYSTEM

COMMAND.

3. Press [5] and [6].

You can also use the function list in place of steps 2 and 3

to start this function.

1. Press the [MENU] key to enter the function list.

2. Press [NEXT] until you reach the ADD/CHNG USER?

prompt.

3. Press [ENT].

4. The display shows ENTER USER #. Enter the user number and

press [ENT].

5. The display shows USER # (or user text, such as the name of

the user, if this feature was programmed into your system by

your security company) to allow for confirmation.

Press [ENT] if the correct user number (or user name)

appears. Press [ESC] if not.

6. ADD PASSCODE? appears. (If the user number already exists,

CHANGE PASSCODE? Appears.) Press [ENT].

7. ENTER NEW CODE appears. Enter the new passcode followed

by [ENT]. ENTER AGAIN appears.

8. Enter the new passcode a second time for confirmation. Press

[ENT]. The display shows PASSCODE ADDED (or PASSCODE

CHANGED if the user number was already in the system).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Bosch D7212GV2 User Manual Page 19