Video Signal Equipment | 225
www.boschsecuritysystems.com
CCTV
Technical Specifications
Electrical
Model Rated Voltage Power at
No. Voltage Range Rated Voltage
LTC2210/60 120 VAC,
50 / 60 Hz
105 to 130 4 W
LTC 2 210 / 5 0 230 VAC,
50 / 60 Hz
195.5 to 253 4 W
Video Inputs: One (1) looping.
Range: 0.5 Vp-p to 2.0 Vp-p.
Impedance: Automatically switching 75 ohm terminated or
high impedance looping.
Video Outputs One (1).
Video Gain Unity.
Bandwidth (-3 dB
point)
12 M Hz typical.
Differential Gain 3% typical.
Differential
Phase
3° typical.
Alarm Outputs
Open collector and/or normally open contact closure. The relay
contacts are rated at 1.0 A at 40V AC/DC and a resistive load of 10
VA maximum.
Controls
ALM CLR/ESC Key
Clears an alarm. Cancels beeper, blinking alarm LED, and contact
closure. Unit remains in the pre-alarm state (reset and arm are not
changed). When programming the system, this button can be used to
exit from the programming menus.
ALARM LED
On when armed, blinks when alarm is triggered.
SETUP/ENTER Key
Pressing SETUP/ENTER places the on-screen programming menus
on the video monitor. This key is also used to access sub-menus
during programming.
Direction Keys
These keys are used to navigate through the programming options.
They are also used to define the detection zones.
Detection Zones
Using the arrow keys, detection zones can be drawn anywhere over
the full active video for PAL or NTSC. Minimum detection size is 15%
H x 15% V (2% of screen area). Maximum size is the entire active
video. Detection zones are created on a 64 element (H) by30 element
(V) grid for NTSC and on a 64 element (H) by 36 element (V) for PAL.
Indicators
POWER on LED (Green).
ALARM LED (Red).
Cable (Included) Cable with 15-pin connector on one end.
Mechanical
Finish Charcoal
Dimensions
(W x H x D)
223 x 280 x 40 mm
(8.77 x 11.0 x1.59 inch)
Weight 2 kg, (4.5 lb)
Evironmental
Operating Temperature 0°C to +50°C (32°F to +122°F)
Storage Temperature -40°C to +60°C (-40°F to +140°F)
Humidity 10% to 80% relative, non condensing
Vibration 3g swept sine wave, 15Hz to 2000Hz.
Shock 50 g, 11 ms, 1/2 sine.
Electromagnetic Compatibility
EMC Requirements CE Immunity, CE Emission Class B,
FCC Class B, ICES-003.
Safety CE, UL, cUL.
Ordering Information
Model & Description
LTC 2210 / 6 0
Single channel motion detector, 120 VAC, 60 Hz
LTC 2210 / 5 0
Single channel motion detector, 230 VAC, 50 Hz
(8 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals