Bosch EX82 Installation Manual download pdf (Page 8)

6 en | EX80/82-IP

MAN80/82IPB Rev.0 | 2008.10 Quick Install Bosch Security Systems

2.3 Mounting bracket attachment

1.) Attach the Mounting Bracket to the Camera’s Mounting Block

using the six bolts supplied with the bracket

2.) Snug the two halves of the bracket together with the Allen head

set screw

3.) Tighten the setscrew enough so that the camera can be adjusted

for angle. Do not over-tighten.

4.) Note the angled part of the mounting bracket faces to the rear of

the camera

2.4 Camera: Mounting and setup:

Select a suitable location that protects the camera from accidental

damage, tampering and environmental conditions exceeding the

specifications of the camera to be mounted.

These mounting guidelines should be followed:

1.) Locate the bracket such that it cannot be easily interfered with,

either intentionally or accidentally.

2.) Select a smooth, flat mounting surface

to ensure proper sealing.

The surface must also be capable of supporting the combined

weight of the camera and mounting hardware under all expected

conditions of vibration and temperature. Camera performs best

mounted 3-6m off the ground.

3.) Secure all cabling.

CAUTION! Ensure the selected location is protected from falling

objects, accidental contact with moving objects and unintentional

interference from personnel. Follow all applicable building codes.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Bosch EX82 Installation Manual Page 8