VideoEdge Camera Handler Release NotesVideoEdge 4.2.1Camera Handler v4.2.1.1022In case of discrepancy, the information in this document supersedes inf
American Dynamics 4-2 Camera Handler Release NotesADVEIPSD22P H.264, MJPEG, MPEG4Yes 4/4 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Tested & CertifiedADVEIPSD3
Samsung 28-2 Camera Handler Release NotesDefault Ports• Port 80 for HTTP• Port 554 for RTSPDefault Username & PasswordUsername: adminPassword: 4
Samsung28-3• For SPE-400, each Samsung encoder's channel has an independent IP. To add an encoder to the NVR, the user should add every channel o
Samsung 28-4 Camera Handler Release Noteszero and start from 1024x768. Then if handler wants to set 1280x720 to camera, the index is '2'.•
Samsung28-5• If FPS is too low, RTSP connects to camera may timeout and then the NVR will have no video. The following cameras were found to have this
Samsung 28-6 Camera Handler Release Notes
29-1SONYSupported Key Functions• Video Streaming – Single and Dual• Video Codec – MJPEG, MPEG4 and H.264• Audio Streaming • Audio codec supported depe
SONY 29-2 Camera Handler Release Notes• Port 554 is for RTSPDefault Username & Password• Username: admin• Password: adminLimitations•SONY 5th ge
SONY29-3resolution might not be able to handle the maximum frame-rate even in single-stream use (MPEG4 is less intensive and may handle the maximum fr
SONY 29-4 Camera Handler Release Notes
American Dynamics4-3ADCi600-D033 H.264, MJPEG Yes 1/1 4.1, 4.2, 4.2.1 Tested & CertifiedADCi600-D143 H.264, MJPEG Yes 1/1 4.1, 4.2, 4.2.1 Tested &
American Dynamics 4-4 Camera Handler Release NotesADCi400-D013 H.264, MJPEG Yes 1/1 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Tested & CertifiedADCi400-D031 H
5-1ACTi CorporationThis version of the VideoEdge camera handler is fully integrated with ACTi Corporation line of IP cameras. ACTi has number of API’s
ACTi Corporation 5-2 Camera Handler Release NotesTCM5311 4.1, 4.2, 4.2.1 Works as designedTCM5611 4.1, 4.2, 4.2.1 Works as designedModel CODEC Supp
6-1Arecont VisionVideoEdge camera handler is fully integrated with the Arecont Vision line of megapixel cameras including full support for the 180˚ an
Arecont Vision 6-2 Camera Handler Release NotesAV2100 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Works as designedAV2100DN 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Works as des
Arecont Vision6-3NoteEach of the 8xxx cameras are comprised of four individual cameras housed together as a “single camera”. Please make sure you have
Arecont Vision 6-4 Camera Handler Release Notes
7-1AXIS CommunicationsVideoEdge camera handler is fully integrated with the AXIS communications line of IP cameras and video encoders. AXIS has number
i-ii Camera Handler Release NotesNoticeThe information in this manual was current when published. The manufacturer reserves the right to revise and
AXIS Communications 7-2 Camera Handler Release NotesM1103 4.0.1, 4.1, 4.2, 4.2.1 Works as designedM1104 4.0.1, 4.1, 4.2, 4.2.1 Works as designedM111
AXIS Communications7-3M3203-V 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Works as designedP3301 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Works as designedP3301-V 4.0, 4.0.1, 4.1,
AXIS Communications 7-4 Camera Handler Release NotesP5534-E 4.0.1, 4.1, 4.2, 4.2.1 Works as designedQ6032-E 4.0, 4.0.1, 4.1, 4.2, 4.2.1 Works as des
8-1BoschSupported Bosch cameras:Model CODEC Supported Audio I/O VideoEdge Versions SupportedCertificationAutoDome (Supported Firmware v15500552)VJR-82
Bosch 8-2 Camera Handler Release Notes
9-1CBCSupported CBC Cameras:Model CODEC Supported Audio I/O VideoEdge Versions SupportedCertificationFixed IP CamerasMP1A 4.0.1, 4.1, 4.2, 4.2.1 Works
CBC 9-2 Camera Handler Release Notes
10-1FLIRIn this release the VideoEdge camera pack is fully integrated with FLIR’s D, PT and F series, multi sensor, pan tilt and fixed thermal securit
FLIR 10-2 Camera Handler Release NotesD-625 4.1, 4.2, 4.2.1 Works as designedD-645 4.1, 4.2, 4.2.1 Works as designedMulti-Sensor Pan Tilt CamerasPT-
11-1Panasonic CorpVideoEdge camera handler is fully integrated with the Panasonic line of IP cameras. Panasonic, generally, doesn't change the co
1-1General PurposeThe purpose of this document is to provide a detailed list of supported manufacturers and manufacturers’ camera lines integrated and
Panasonic Corp 11-2 Camera Handler Release NotesSC395 4.0.1, 4.1, 4.2, 4.2.1 Works as designedFixed CamerasNP244 4.0.1, 4.1, 4.2, 4.2.1 Works as des
12-1SamsungSupported Samsung Cameras:Model CODEC Supported Audio I/O VideoEdge Versions SupportedCertificationEncodersSPE-100 4.2.1 Works as designedS
Samsung 12-2 Camera Handler Release NotesSND-7080 4.2.1 Works as designedSND-7080F 4.2.1 Works as designedPTZ Series CamerasSNP-3120 4.2.1 Works as
13-1SONYThis version of VideoEdge camera handler provides full integration with the SONY line of Video Encoders and IP cameras. SONY has number of API
SONY 13-2 Camera Handler Release NotesMini Dome CamerasSNC-DH140 4.0.1, 4.1, 4.2, 4.2.1 Works as designedSNC-DH140T 4.0.1, 4.1, 4.2, 4.2.1 Works as
SONY13-3SNC-RX550P 4.0.1, 4.1, 4.2, 4.2.1 Works as designedSNC-RX570N 4.0.1, 4.1, 4.2, 4.2.1 Works as designedSNC-RX570P 4.0.1, 4.1, 4.2, 4.2.1 Works
SONY 13-4 Camera Handler Release Notes
14-1Camera Specific Release NotesThis section is a collection of camera release notes as provided with each camera release. This section provides deta
Camera Specific Release Notes 14-2 Camera Handler Release Notes
15-1American Dynamics 8 Channel IP Encoder (M&H)Supported Key Functions• Video Streaming – Single and Dual• Video Codec – MJPEG, MPEG4 and H.264 a
General Purpose 1-2 Camera Handler Release Notes
American Dynamics 8 Channel IP Encoder (M&H) 15-2 Camera Handler Release Notes• Changing streaming parameters like bit-rate, quality, frame-rate
16-1American Dynamics Fixed IP CameraSupported Firmware• v1.57 or laterSupported Key Functions• Video Streaming: Single• Video Codec: MJPEG and MPEG-4
American Dynamics Fixed IP Camera 16-2 Camera Handler Release NotesLimitations• The camera will reboot when changing codec (audio or video), resolut
17-1American Dynamics Fixed Camera (illustra 400 series)Supported Firmware• v2.20 or laterSupported Key Functions• Video Streaming – Single, Dual• Vid
American Dynamics Fixed Camera (illustra 400 series) 17-2 Camera Handler Release NotesLimitations• The camera will reboot when changing codec (audio
18-1American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)Supported Key Functions• Video Streaming• Audio Streaming – Supp
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes) 18-2 Camera Handler Release Notesrtsp://camera_ip:7781/secondarys
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes)18-3• NVR only supports audio in 8KHz.• illustra 600, add 720p and 1
American Dynamics Fixed Camera (illustra 210, illustra 600 and illustra 610 Domes) 18-4 Camera Handler Release Notes•illustra 210 = H264, Maximum av
19-1American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)Supported Firmware• v1.0.16 or laterSupported Key Functions• Vi
2-1What’s New in This ReleaseThis camera handler release provides integration for the following cameras:• illustra 600/610 Box and BulletIn addition,
American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets) 19-2 Camera Handler Release Notesrtsp://camera_ip/video2.sdp• Th
American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets)19-3steams configuration on the camera. The camera only identifies
American Dynamics Fixed Camera (illustra 600, 610 and 600LT Series Box and Bullets) 19-4 Camera Handler Release Notes• It may take 2 minutes when c
20-1American Dynamics IP SpeedDomeSerial NumberNVR will use the camera’s MAC address as the camera serial number.Supported Key Functions• Video Stream
American Dynamics IP SpeedDome 20-2 Camera Handler Release NotesDefault Username & Password• User name: admin• Password:adminBandwidth Efficienc
American Dynamics IP SpeedDome20-3• The maximum frame rate in dual streaming mode is:• When codec is H.264/MJPEG:•The maximum frame rate for the H.264
American Dynamics IP SpeedDome 20-4 Camera Handler Release Notes
21-1ACTi CorporationSupported Key Functions• Video Streaming• Query Device• Dry Contact Events• RebootUnsupported Key Functions• Audio Streaming•PTZ•P
ACTi Corporation 21-2 Camera Handler Release NotesDefault Username & Password• Username: admin• Password: 123456Supported ResolutionAll resoluti
ACTi Corporation21-3• The ACTi generic camera driver will not support the following features:• Image settings:•Lens day/night mode•Brightness•Contrast
What’s New in This Release 2-2 Camera Handler Release NotesNoteSince the NVR uses CBR to control bitrate, the bandwidth of H.264 and MPEG4 are the s
ACTi Corporation 21-4 Camera Handler Release NotesResolution: Power Cycle first. If problem persists, carry out hardware reset.• Sometimes the came
22-1Arecont VisionSupported Key Functions• The Arecont Vision AV8xxx employs four, two-megapixel cameras in 180˚ or •360˚ panoramic views. Models ar
Arecont Vision 22-2 Camera Handler Release NotesLimitations• The AV8xxx will be viewed with Victor Client. Not all functionality is supported by the
Arecont Vision22-3• When upgrading the camera handler pack, note that the parameters of video streams may be changed to the default values. It is rec
Arecont Vision 22-4 Camera Handler Release Noteswill trigger a lost video alert. Cameras where this issue has been observed are AV3115DN, AV5125IR,
Arecont Vision22-5AV1310 1280 x 1024 1280 x 1024 & 640 x 512AV1315 1280 x 1024 1280 x 1024 & 640 x 512AV1325 1280x1024 1280 x 1024 & 640 x
Arecont Vision 22-6 Camera Handler Release Notes
23-1Axis CommunicationsSupported Key Functions• Video Streaming – Single and Dual• Video Codec – MJPEG, MPEG4 and H.264• Audio Streaming • Audio codec
Axis Communications 23-2 Camera Handler Release NotesCamera Serial NumberNVR will use the camera’s MAC address as the camera serial number.Supported
Axis Communications23-3• Q1755 without PT head installed will still show up as a PTZ camera in NVR. However, none of the PTZ functions will work. This
3-1Continual SupportAt any given time there is only one camera pack available for the VideoEdge NVR. This camera pack provides full support to all exi
Axis Communications 23-4 Camera Handler Release Notesrecorded playback by Victor Client, a blank image appears for a very short period at the point
Axis Communications23-5• The Sequence portion of the NVR web client PTZ page may appear or disappear when the page is refreshed. • If the MJPEG qualit
Axis Communications 23-6 Camera Handler Release Notes
24-1BoschSupported Key Functions• Video Stream• Query Device•Audio Stream• Events•PTZVideo StreamSupports MJPEG and H264 streamsNVR supports dual H264
Bosch 24-2 Camera Handler Release NotesDefault Ports• Port 80 for HTTP• Port 554 for RTSPDefault Username & PasswordService user and default pas
Bosch24-3Supported ResolutionsModel Max Resolution (Default Value) Resolution List in NVR 4.2+AutoDome JR800 HD 1280x720 1280x720, 4CIF, CIFDinion NBN
Bosch 24-4 Camera Handler Release NotesLimitations• Due to a camera limitation, the handler can only support one MJPEG stream. If a second MJPEG str
Bosch24-5• When setting up Dry Contacts on NBN-921-P IVA serials and NBN-498 serials, it is necessary to activate the Alarm Inputs on the camera GUI f
Bosch 24-6 Camera Handler Release Notesresolution value on Stream 2.• Due to the NVR web client known issue, when setting the resolution for the sec
25-1CBCSupported Key Functions• Video Streaming – Single and Dual• MJPEG and H.264 video codecs • Query DeviceUnsupported Key Functions• PTZ Operation
Continual Support 3-2 Camera Handler Release Notes
CBC 25-2 Camera Handler Release NotesDefault Username & Password• Username: admin• Password: <The password should be left blank>Supported
CBC25-3ConsiderationsCBC model cameras with firmware version 62414 will be configured as their Arecont equivalent, also taking the Arecont model. In f
CBC 25-4 Camera Handler Release Notes
26-1FLIRSupported Key Functions• Video Streaming – Single and Dual• PTZ – Applies to cameras that have mechanical Pan and Tilt and Optical Zoom.• Quer
FLIR 26-2 Camera Handler Release NotesDefault Username & Password• Username:admin• Password:indigoFirmware RequirementsVideo Stream FeatureSpeci
FLIR26-3LimitationsKnown IssuesModel Known Camera Limitations1 F-SeriesD-SeriesPT-SeriesDue to a necessity of FLIR camera video hardware re-start, it
FLIR 26-4 Camera Handler Release NotesSetupD-Series D-Series camera returns incorrect firmware version number in the IRDeviceVersionGet CGI response
FLIR26-53 Models: PT-Series/D-Series/F-Series Steps for enabling the Second stream on the PT-Series/D-SeriesBefore setting a FLIR camera’s IP addres
FLIR 26-6 Camera Handler Release Notes5 The following describes the steps for installing a dictionary file to a FLIR camera. Note: In order for a FL
FLIR26-7TroubleshootingError Message on NVR Possible root causes Trouble shooting steps NVR Failed to add camera.No values returned. The specified dev
4-1American DynamicsSupported American Dynamics cameras:Model CODEC Supported Audio I/O VideoEdge Versions SupportedCertificationVideo EncodersADEIP8H
FLIR 26-8 Camera Handler Release Notes
27-1PanasonicSupported Key Functions• Video Streaming – Single and Dual• Video Codec – MJPEG, MPEG4 and H.264• Audio Streaming • Audio codec supported
Panasonic 27-2 Camera Handler Release NotesSupported Camera API & ModelsCamera Serial NumberNVR will use the camera’s MAC address as the camera
Panasonic27-3The specific Audio Video stream feature characteristics by model families are:Note1 The creation/deletion of audio streams does not af
Panasonic 27-4 Camera Handler Release Notes• Due to camera performance limitations when using dual stream out of a M-JPEG/MPEG4/H.264 camera, the ca
Panasonic27-5Settings, Video Processing Amp) is not available. Some camera models, including SC384, will display Back Light Compensation as “Unknown”
Panasonic 27-6 Camera Handler Release NotesNP304, NF302 Picture quality is 1.3 mega pixels; there are two aspect ratios 4:3 & 16:9. MPEG-4 is no
Panasonic27-7Generic Does not support any other settings other than video, audio and event stream related functionsThe mode settings of H.264 and MPEG
Panasonic 27-8 Camera Handler Release Notes
28-1SamsungSupported Key Functions• Video Stream•Audio Stream•PTZ• Query Device• Dry Contact EventsVideo StreamSupports MPEG4, MJPEG and H264 streams(
Comments to this Manuals