Bosch DIP-7082-8HD Installation Guide download pdf (Page 16)

System setup - first steps

The following installation directive provides information on Installation and Configuration.

DIVAR IP systems are based on Windows Server 2008 R2 operating system.

This chapter is valid for DIVAR IP models that come with pre-installed hard drives. Empty units

start into the DOM recovery menu on first start. The recovery process and the RAID setup are

described in the installation manual.

See also:

– Additional documentation and client software, page 31

Introduction

DIVAR IP systems are shipped with a pre-installed Configuration Wizard from factory.

Setup instruction

All DIVAR IP systems are preconfigured with a default IP address and with default iSCSI

settings.

– IP Address: 192.168.0.200

– Subnet mask: 255.255.255.0

Observe the following:

– DIVAR IP needs to have an active network link during installation. Make sure that the

network switch you are connecting to is powered on.

– The default IP address must not be occupied by any other device in the network. Make

sure that the default IP addresses of existing DIVAR IP systems in the network are

changed before adding another DIVAR IP.

– Determine whether the initial installation is on a DHCP network. If not then you must

assign valid IP addresses to the video devices. Consult the local IT administrator to obtain

a valid IP address range to be used with DIVAR IP and associated devices.

– The default iSCSI settings are optimized for use with Bosch VMS/VRM.

User with administrator rights:

– User: BVRAdmin

– Password: WSS4Bosch

Notice!

We strongly recommend not changing the user settings. Changing the user settings can result

in malfunctioning of the system.

Starting the application

DIVAR IP system is ready to go out of the box. The application provides a simple to install and

intuitive to use solution for network surveillance systems.

To start the application:

1. Connect the unit and the cameras to the network.

2. Turn on the unit.

The Windows Server 2008 R2 setup process starts.

3. Select the appropriate language for the installation, then click Next.

4. In the Country or region, Time and currency and Keyboard layout lists, click the

appropriate item, then click Next.

The Microsoft Software License Terms and the EULA (End User License Agreement) are

displayed.

4.1

4.2

4.3

16 en | System setup - first steps DIVAR IP 7000 2U

2014.01 | V3 | DOC Quick Installation Guide Bosch Sicherheitssysteme GmbH

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments

Bosch DIP-7082-8HD Installation Guide Page 16

Comments to this Manuals

Related products and manuals for Server barebones Bosch DIP-7082-8HD