Bosch GTV15NW3A Instruction Manual download pdf (Page 21)

Aligning the appliance

Note

To ensure that it functions properly, the appliance must

be aligned using a spirit level.

1. Move the appliance into its intended installation

position.

2. Screw the feet in/out until the appliance is exactly

aligned.

Changing the door hinge

We recommend to have the door hinge changed by our

customer service. How much a door hinge change will

cost you can find out contacting customer service.

m Warning

When the door hinge is changed, the appliance must

not be connected to the power supply. Please pull the

mains plug beforehand.

Required tools

Changing door hinge of the appliance

door

1. Open the appliance door and unhinge and remove

all fittings from inside the appliance (see section

headed Fittings).

2. Unscrew the 2 screws (1).

3. Take off the cover plate (2) and set it down on a

soft surface.

Hold on to the appliance door!

4. Unscrew the 2 screws (3).

5. Unscrew the 2 screws (4).

6. Remove the top hinge (5).

7. Unhook the appliance door and set it down on a

soft surface.

8. To avoid damaging the appliance rear side, provide

cushioning material. Place the appliance carefully

onto its rear side.

8 mm hex nut driver

Cross-shaped screwdriver

Thin-blade screwdriver

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 61 62

No comments

Bosch GTV15NW3A Instruction Manual Page 21