Bosch NIT5068UC Use and Care Manual download pdf (Page 11)

Operation

Main power switch

Use the main switch to turn on the electronic circuitry for

the control panel. The cooktop is now ready to use.

Turning the cooktop on

Touch the On/Off touch key until the indicator above the

main switch and the temperature level indicators ‹ next

to the heating elements turn on.

Turning the cooktop off

Touch the On/Off touch key. The indicator above the On/

Off key goes out. The cooktop is switched off. The

residual heat indicators will remain on until the elements

have cooled off sufficiently.

Note: The cooktop switches off automatically when all

the cooking zones have been switched off for more than

20 seconds.

Setting the cooktop

This section will show you how to set the elements. The

table contains details on the heat settings for a variety of

dishes.

Setting the element

Select the desired heat level using the touch keys + and -

Heat level 1 = minimum power

Heat level 9 = maximum power

Each heat level has an intermediate level. This level is

displayed as a dot.

Selecting the heat level

The cooktop must be turned on.

Select the desired element with by touching the $

symbol on the control panel. In the display next to the

element symbol ‹ lights up.

Within the following 10 seconds, touch the + or - key.

The default settings appear.

+ key = power level 9

- key = power level 4

To change the power level, touch the + or - key until

the desired power level is displayed.

Note: The selected power level will flash if no pan is

placed on the induction element. After a certain time, the

element turns itself off.

Changing the heat setting

Select the cooking zone and touch the

@ or A symbol

until the required heat setting appears.

Turning off the element

Touch the + or - key until ‹ appears. The element turns

off and the residual heat indicator is displayed.

Notes

▯ If there is no cookware on the induction cooking zone,

the heat setting display blinks. After a while, the

cooking zone will switch itself off.

▯ If cookware has been placed on the cooking zone

before you turn on the cooktop, it will be detected

within 20 seconds after you have touched the main

switch and the cooking zone will be selected

automatically. Once detected, set the power level

within the next 20 seconds, otherwise the cooking

zone will turn off.

Even if there are several pots and pans on the cooktop

when it is switched on, only one piece of cookware is

detected.

Recommendations

▯ When heating up puree, cream soups and thick

sauces, stir occasionally.

▯ Set heat setting 8 to 9 for preheating.

▯ When cooking with the lid on, turn the heat setting

down as soon as steam escapes between the lid and

the cookware.

▯ After cooking, keep the lid on the cookware until you

serve the food.

▯ To cook with the pressure cooker, observe the

manufacturer's instructions.

▯ Do not cook food for too long, otherwise the nutrients

will be lost. The kitchen timer can be used to set the

optimum cooking time.

▯ For healthier cooking results, oil or grease should not

be heated until it smokes.

▯ To brown food, fry small portions in succession.

▯ Cookware may reach high temperatures while the food

is cooking. We recommend that you use pot holders.

▯ You can find recommendations for energy-efficient

cooking in section ~ "Protecting the environment"

 

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 67 68

Comments to this Manuals

No comments

Bosch NIT5068UC Use and Care Manual Page 11

Comments to this Manuals

Related products and manuals for Unknown Bosch NIT5068UC