Bosch PKY475FB1E Instruction Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
en Operating the appliance
8
1Operating the appliance
Operating the appliance
In this section, you can find out how to set your
appliance. In the table, you can find the settings for
various dishes.
Switching on or off
Note: The appliance switches off automatically when
the temperature setting remains at 0 for more than
20 seconds.
Switching on
Touch the # symbol.
An audible signal sounds. The indicator above the main
switch lights up. The appliance is ready to use.
Switching off
Touch the # symbol until the indicator above the main
switch goes out.
The appliance is switched off. The residual heat
indicator remains lit until the appliance has cooled
down sufficiently.
Setting the temperature
1. Switch on the appliance with the main switch.
‹‹‹ lights up on the temperature display.
2. Set the required temperature using the buttons.
The heating indicator flashes.
Once the set temperature has been reached, an audible
signal sounds and the heating indicator goes out. Now
you can place the food onto the teppanyaki.
Note: The appliance regulates the temperature by
switching the heat on and off. The heat may switch on
and off even at the highest setting.
Warming setting
The teppanyaki must be switched on.
Select the e warming setting in the control panel.
Do not attempt to keep excessively large quantities of
food warm. All food that is to be kept warm should be in
contact with the frying surface, otherwise it will cool
down. Do not keep food warm for too long, otherwise it
will become dry.
Cleaning level
At the cleaning setting, the appliance heats to
40 °C. This enables you to leave the dirt to soak once
you have poured a little water and added a drop of
washing-up liquid on the frying surface (1 hour
maximum). You can begin cleaning once the dirt has
begun to soften.
Switching off the rear heating zone
If you are preparing small amounts of food, you can
also just use the front heating zone. You can use the
rear heating zone for keeping food warm.
1. Switch on the appliance.
2. Touch the ƒ symbol.
The display above the symbol lights up. The rear
heating zone is switched off.
Note: The next time you switch the appliance on, this
setting will be retained. You can change this behaviour
in the basic settings.
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comments to this Manuals

No comments