Bosch WFB 1002 User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
GB
First wash cycle
"n
Carry out the first wash cycle without laundry
to remove any water left over from the factory
tests.
1. Check that the transit bolts have been re
moved from the back of the machine (see
installation instructions).
2. Turn the tap ON.
3. Pull the detergent drawer out as far as it will
go.
4. Pour half a measuring cup into compart
ment II. Do not use a special detergent for
délicates or woollens as these will create
too much foam.
5. Turn the programme selector clockwise and
set it to Cottons / coloureds, normal (B).
6. Set the temperature selector 90 '^C.
7. Press the "ON/OFF" button.
The programme is started.
8. When the programme has ended, press the
"ON/OFF" button to switch the machine off.
Washing
Open the door
<> Pull the handle on the door towards you
(Fig.®).
Put washing into the machine
! Any items which have been pre-treated with
solvent-based cleaners, such as stain remo
vers and petrol-based agents must be aired
before they are put into the machine.
Explosion hazard!
! Before loading the machine, ensure that
there are no foreign objects nor trapped
pets in the drum.
O Place the washing into the drum so that'it is
folded out and loose, with a mixture of large
and small items.
Close the door
! When you close the door, make sure that
nothing is caught between the door and the
rubber seal.
O Close the door by pressing it shut until it
snaps into place with an audible click.
Add detergent
Turn ON the tap
65
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 72 73

Comments to this Manuals

No comments