Bosch UHO-HPS User Manual download pdf (Page 16)

16 en | Installation UHI/UHO Series

F.01U.026937 | V 2.0 | 2007.01 User Manual Bosch Security Systems

Fig. 4.1 Thread holes for mounting with rear connections, or for feed

through wiring

4.5 Opening the cover

Open the cover by unlatching the three latches on the side of

the housing. See Figure 4.2. If the optional tamper-resistant

screws have been installed, use the supplied wrench to remove

the screws before opening the latches.

Fig. 4.2 Unlatching the cover

4.6 Camera/Lens installation

1. Remove the two screws holding the camera tray to the

housing. Remove tray from the housing.

2. If using the feed-through feature, refer to

Section 4.7.3 Feed-through Wiring.

For mounting with feed-through wiring

For mounting with rear connections

WARNING!

The heater will be HOT when in operation - DO NOT TOUCH.

Always switch heater OFF when working on the camera.

Latches

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

No comments

Bosch UHO-HPS User Manual Page 16