Bosch UHO-HPS User Manual download pdf (Page 26)

26 en | Installation UHI/UHO Series

F.01U.026937 | V 2.0 | 2007.01 User Manual Bosch Security Systems

4. Install screws into the appropriate holes.

5. Close the cover and secure the latches.

6. Optional tamper-resistant screws are provided with the

housing. If desired, secure the latch using these three

screws and the provided tamper-resistant wrench.

4.12 Sunshield

1. Loosen the two screws (M4 x 10) on the top of the hous-

ing.

2. Slide the sunshield to the desired position. It has a range

of 50 mm (2 in).

3. Tighten the screws to lock the sunshade into position.

4. If the sunshield is removed or not installed, plug the two

screw holes with the hole plugs supplied with the housing

hardware kit.

4.13 Fuse replacement

1. To replace a fuse, pull the top of the fuse holder.

2. Replace the fuse with a fuse that has the same current rating.

The fuse is a 5 mm x 20 mm slow blow breaking capacity car-

tridge-type fuse.

NOTE! There is a spare fuse inside the housing.

Camera voltage Fuse rating

24 VAC 4 A, 250 VAC

120 VAC 2 A, 250 VAC

230 VAC 2 A, 250 VAC

Table 4.8 Specifications for replacement fuses

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Bosch UHO-HPS User Manual Page 26