Bosch UHO-HPS User Manual download pdf (Page 22)

22 en | Installation UHI/UHO Series

F.01U.026937 | V 2.0 | 2007.01 User Manual Bosch Security Systems

5. Connect the supply power wires to the terminal block. See

Figure 4.8. Strip no less than 6 mm (0.25 in) and no more

than 8mm (0.31 in) of insulation away from the wire. Be

sure not to nick the wires.

6. Cut the power cord on 120 VAC and 230 VAC camera mod-

els; leave enough cable to allow connection to the terminal

block. Strip no less than 6 mm (0.25 in) and no more than

8 mm (0.31 in) of insulation away from the wire. Be sure

not to nick the wires. Connect these wires to the connec-

tors provided on the terminal block. See Figure 4.8.

CAUTION!

Be sure to securely tighten all fittings to ensure a liquid-tight

seal. Failure to do this could allow water to enter the housing

and damage electronic parts, camera, and lens.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

No comments

Bosch UHO-HPS User Manual Page 22