Bosch GSH 27 VC Operations Instructions download pdf (Page 16)

16 | English

1 609 929 U79 | (13.8.10) Bosch Power Tools

The declared vibration emission level repre-

sents the main applications of the tool. However

if the tool is used for different applications, with

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 2006/42/EC, 2000/14/EC.

2000/14/EC: Guaranteed sound power level

108 dB(A). Conformity assessment procedure

according to Annex VI.

Equipment category: 10

Notified body:

TÜV NORD CERT GmbH & Co. KG,

Am TÜV 1, 30519 Hannover

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

04.12.2009

Assembly

Changing the Tool

f Before any work on the machine itself, pull

the mains plug.

Clean the tool shank 5 and apply a light coat of

grease.

Tools without Shoulder (see figures A–B)

Pivot the tool retainer 3 upward by approx. 150°

and insert the tool into the tool holder 4.

Pivot the tool retainer 3 down to lock the tool.

Check the latching by pulling the tool.

Tools with Shoulder (see figures C–D)

Tools with an insertion length of 152 mm (6") to

the shoulder can be used.

Pivot the tool retainer 3 upward by approx. 180°

and insert the tool into the tool holder 4.

Pivot the tool retainer 3 back to the tool to lock

it. The shoulder 6 must be held by the tool re-

tainer 3.

Check the latching by pulling the tool.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-1144-003.book Page 16 Friday, August 13, 2010 11:05 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 186 187

Comments to this Manuals

No comments

Bosch GSH 27 VC Operations Instructions Page 16

Comments to this Manuals