Bosch WORCESTER GREENSTORE Operations Instructions download pdf (Page 5)

PRODUCT DETAILS

6 720 645 752 (2012/05) 5

2.4 STANDARD DELIVERY

Fig. 1

[1] Twin Coil DHW cylinder

[2] Temperature and pressure relief valve

[3] Immersion heater, 3 kW

[4] Tundish Ø 15/22 mm

[5] Solar high limit thermostat

[6] Cold water Inlet control group

[7] 2-Port valve

[8] Dual cylinder thermostat

[9] DHW expansion vessel incorporating fixing bracket with

connection hose

[10] Connection set

[11] Set of printed documents for the appliance

2.5 SCALING/CORROSION PROTECTION

The cylinder is made from corrosion-resistant Duplex stainless steel.

The cylinder can be used with all mains water supplies.

Scaling: In cases where the water hardness is very high (over 450 ppm)

a water softener must be used to protect the cylinder against rapid

development of scale.

Corrosion protection: Any water softener should be installed,

commissioned and maintained to ensure the water hardness after the

softener is never below 150 ppm.

2.6 DESCRIPTION OF FUNCTION

• If there is insufficient heat input available via the primary (lower) coil,

the secondary heating appliance will heat the upper coil.

• Due to temperature stratification only the upper section of the

cylinder will be heated.

• When hot water is being drawn off, the cylinder temperature in the

upper section drops by approximately 8 °C to 10 °C before the heat

source reheats the cylinder.

AQU-18-3W

AQUA-15-3W

AQU-16-3W

AQU-17-3W

-19-3W

U-

AQU-31-3W

1 4

6 720 645 525-07.2O

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Bosch WORCESTER GREENSTORE Operations Instructions Page 5