Bosch NET 8054UC Operations Instructions download pdf (Page 13)

Operation

Main power switch

Turning on

Turning off

Note

Use the main switch to turn on the electronic circuitry for the control panel. The

cooktop is now ready to use.

Touch ON/OFF until the indicator above the main switch and the symbols O for the

heating elements turn on.

Touch ON/OFF until the indicator above the main switch turns off. The residual heat

indicators will continue to appear until the elements have cooled off sufficiently.

The cooktop will turn off automatically if all of the elements have been turned off for

longer than 20 seconds.

If residual heat is still present when the cooktop is turned on, H/i-,will appear in the

heating element display.

Setting the cooktop

This section explains how to set the elements. In the table, you can find temperature

settings for various foods.

Setting the heating

element

Select the desired heat setting in the setting area.

Heat setting 1 -- lowest power

Heat setting 9 = highest power

Each heat setting has an intermediate position.

It is indicated by. and is set using o.

Setting the heat setting The cooktop must be turned on.

1. Touch the symbol O for the desired heating element.

u will appear in the display and the symbol O for the selected heating element

will light up brightly.

2. With the next 10 seconds touch the desired heat setting (1-9) in the setting area.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 103 104

No comments

Bosch NET 8054UC Operations Instructions Page 13