Bosch VG4-A-PSU0 Installation Guide download pdf (Page 13)

AutoDome Pipe Mount Installing the Pipe Mount | en 13

Bosch Security Systems, Inc. Installation Guide F.01U.251.410 | 1.0 | 2011.08

1. Use the wall mount template supplied in the packaging box

to locate the four (4) mounting holes for the Power Supply

Box.

2. Drill four (4) holes for the mounting anchors. If installing

outdoors, apply a weatherproof sealant around each hole

at the mounting surface.

3. Place the Power Supply Box into the optional Trim Skirt.

4. Secure the Power Supply Box to the wall using four (4)

corrosion-resistant stainless steel studs (not included).

5. Attach the 3/4 in. (20 mm) watertight pipe fittings (not

supplied) to the holes of the Power Supply Box through

which you will run the power, video, and control data

wires.

NOTICE!

A stud diameter of 6.4 mm (1/4 in.) or 8 mm (5/16 in.), able to

withstand a 120 kg (265 lb) pull-out force is recommended.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

No comments

Bosch VG4-A-PSU0 Installation Guide Page 13