Bosch D1265 Installation Guide download pdf (Page 13)

D9412GV4/D7412GV4/D7212GV4 Setting Up Points and Outputs | en 13

Bosch Security Systems, Inc. Quick Reference Guide F01U215242 | 01 | 2011.10

6 Setting Up Points and Outputs

6.1 Using the Relay Option Within Point Assignments

Relay Programming allows any one point or several points to latch a single relay through

software when the selected point generates an alarm. Relays are number 1 through 8 and are

programmed by entering the number of the relay (1 - 8) in the Relay column in Point

Assignments. This relay latches on a generated alarm and resets after acknowledging and then

clearing the alarm from memory.

Table 6.1 Actual Relays Latched by Control Panel Type

Table 6.2 D8129 Switch Settings for All Control Panel Types

Relay

D8129 Actual Relay Number

D7412GV4/D7212GV4

D9412GV4

19 73

210 74

311 75

412 76

513 77

614 78

715 79

816 80

For the D7412GV4 and D7212GV4, connect to Terminal 28 for data (Zonex 1 Out).

For the D9412GV4, connect to Terminal 26 for data (Zonex 2 Out).

Switch Number Setting

1ON

2OFF

3ON

4ON

NOTICE!

Programmers must be aware of the following considerations:

– Do not use relays designated within Point Assignments for multiple functions. For

example, Relays 73 through 80 on the D9412GV4 should not be used for relay-follow-

point or area-wide or panel-wide relays.

– Relays should not be selected to follow points programmed as Invisible Points.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Bosch D1265 Installation Guide Page 13