Bosch D1265 Installation Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
D9412GV4/D7412GV4/D7212GV4 Table of Contents | en 3
Bosch Security Systems, Inc. Quick Reference Guide F01U215242 | 01 | 2011.10
Table of Contents
1 GV4 Control Panel Connections (D9412GV4 Shown) 5
2 Upgrade GV4 Hardware and Programming 7
2.1 Receive Existing Control Panel Programming 7
2.1.1 Receive Existing Control Panel Programming with RPS 7
2.2 Upgrade Hardware to a GV4 Series Control Panel 7
2.2.1 Prepare to Remove Existing Hardware 7
2.2.2 Remove the Existing Control Panel 7
2.2.3 Install the GV4 Control Panel In the Enclosure 8
2.2.4 Replace the Terminal Strips 8
2.3 Upgrade Programming to a GV4 Control Panel Programming 9
2.3.1 Upgrade a GV3 Series, GV2 Series, G Series, or Non-G Series Control Panel to a GV4 or Later Using
Remote Programming Software (RPS) 5.14 or Later9
3 Programming the Control Panel 10
3.1 RPS Programming over a Network Using the DX4020 Ethernet Network Interface Module 10
3.2 RPS Programming over a Network Using the ITS-DX4020-G GPRS/GSM Communicator 10
3.3 RPS Programming Using the DX4010V2 RS-232/USB Serial Interface Module 10
3.4 RPS Programming Using the B420 Ethernet Communication Module 10
3.5 Programming Using the Keypad Tools Menu 10
4 Programming to Set Up Central Station Reporting 11
4.1 Basic Telephone Set Up in RPS 11
4.2 Basic Internet Protocol (IP) 11
4.3 Account Number 11
5 Programming the Control Panel for Common Reporting Options 12
5.1 Set Up Daily Test Report Using RPS 12
5.2 Set Up Open and Close Reports Using RPS 12
5.2.1 Area Wide Parameters 12
5.2.2 Set Authority Level 12
6 Setting Up Points and Outputs 13
6.1 Using the Relay Option Within Point Assignments 13
6.2 Point Index (Default Values) 14
7 Add System Users Locally With a Keypad 16
7.1 Add Users (CMD 56) Using a Keypad 16
7.2 Add Card (CMD 56) for Access Control Only Using a Keypad 16
8 Turning the System ON or OFF and Keypad Commands 17
8.1 Arming and Disarming the System 17
8.1.1 Master Arming 17
8.1.2 Disarming 17
Page view 2
1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments