Bosch HBJ354AS0Q Instruction Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
Childproof lock en
15
To check the values for the different time-setting
options, touch the
v button repeatedly until the
required symbol is indicated.
Setting the time
When the appliance is connected to the power supply
or following a power failure, the time will flash on the
display. Set the clock.
The function selector must be set to the "Off" position.
1. Touch the v button.
The time will stop flashing.
2. Use the A or @ button to set the time.
After a few seconds, the appliance will apply the time.
Note: You can go to the basic settings to specify
whether or not the time should be shown on the display.
~ "Basic settings" on page 15
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
v button until the symbol for the time is underlined,
and use the A or @ button to change the time.
AChildproof lock
Childproof lock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
Notes
You can go to the basic settings to specify whether
you want the option to set the childproof lock.
~ "Basic settings" on page 15
If a hob is connected, it will not be affected by the
childproof lock on the oven.
After a power cut, the childproof lock will no longer
be active.
Activating and deactivating
To activate the childproof lock, the function selector
must be set to the "Off" position.
Press and hold the D button for approx. 4 seconds.
The symbol for this function will appear on the display.
The childproof lock is now activated.
Note: If a timer duration t has been set, this will
continue to count down. While the childproof lock is
active, the timer duration cannot be changed.
To deactivate the childproof lock, press and hold the
D button again for approx. 4 seconds until the symbol
goes out on the display.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting will appear on the display,
e.g. ™‚ .
2. Use the A or @ button to change the setting if
necessary.
3. Press the v button to confirm.
The next basic setting will appear on the display.
4. Using the v button, continue going through all the
basic settings as described above, changing the
settings if necessary using the A or @ button.
5. When you have finished, press and hold the
v button again for approx. 4 seconds to confirm the
settings.
All basic settings have now been applied.
Basic setting Options
™‚
Display the time
= Hide the time
= Display the time*
™ƒ
Audible signal duration
upon completion of a cook-
ing time or timer duration
= Approx. 10 seconds
ƒ = Approx. 30 seconds*
= Approx. 2 minutes
™„
Button tone that sounds
when a button is touched
= off
= on*
™…
Cooling fan run-on time
= Short
ƒ = Medium
= Long*
= Extra long
™†
Amount of time until a set-
ting is applied
= Approx. 3 seconds*
ƒ = Approx. 6 seconds
= Approx. 10 seconds
™‡
Enable childproof lock acti-
vation
= No
= Yes*
™ˆ
Water hardness**
= softened
= soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/l)
= hard (2.5 - 3.8 mmol/l)
= very hard* (above 3.8 mmol/
l)
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Comments to this Manuals

No comments