Bosch 1375A Instruction Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
SANDING WOOD
When sanding wood the direction of the disc
motion at the contact point should parallel the
grain as much as possible. The rapid cut of
discs and the swirl type scratch pattern they
occasionally create generally prohibit their
use for producing the final finish.
Scratches and circular marks are usually the
result of using too coarse a grit. When
changing to a finer grit, move across the
sanding lines that were made by a previous
coarser disc.
SANDING METAL
When sanding automobiles or appliances,
wipe the metal clean with a non-flammable
solvent or commercial cleaner to remove all
wax and grease. By doing this first, the
sanding discs will sand better and last longer.
For heavy duty work, use a coarse grit disc
first. Follow-up with a medium grit to remove
scratches. To produce smooth finish, use fine
grit disc.
Wire brushes are intended to “clean”
structural steel, castings, sheet metal, stone
and concrete. They are used to remove rust,
scale and paint.
Avoid bouncing and snag-ging
the wire brush, espe-cially
when working corners, sharp edges etc. This
can cause loss of control and kick-back.
!
WARNING
Wire Brush Operations
SANDING TIPS
For best results, tilt the Disc Sander at a 10°
to 15° angle while sanding so that only about
1" of the surface around the edge of the disc
contacts the work.
If the disc (accessory) is held
flat or the back edge of the
disc comes in contact with the work, a violent
thrust to the side may result.
If sander is tilted too much, sanding action
will be too great and a rough cut surface or
gouging and snagging will result.
Guide the Disc Sander with crosswise
strokes. Be careful not to hold the sander in
one spot too long. Do not use a circular
motion, as this makes swirl marks. Test
before use on scrap stock.
Do not force or apply pressure when
sanding. Use only the weight of the tool for
pressure. Excess pressure actually slows the
tool down. If faster stock removal is desired,
change to a coarser grit disc.
Remove gummy paint from metal with an
“open coat” disc. Sand until sparks start to
appear, then stop and change to a “closed
coat” disc to remove any remaining paint.
!
WARNING
-10-
BM 1619P01046 5-05 5/10/05 10:39 PM Page 10
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

Yamaha YAS-203 Handbücher

Bedienungsanleitungen und Benutzerhandbücher für CD Spieler Yamaha YAS-203.
Wir stellen PDF-Handbücher Yamaha YAS-203 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung






Weitere Produkte und Handbücher für CD Spieler Yamaha

Modelle Dokumententyp
CD-S3000 Spezifikationen   Yamaha CD-S3000, 11 Seiten
CDX-393 Bedienungshandbuch   Yamaha CDX-393 Owner's manual, 23 Seiten
CDC-555 Bedienungshandbuch   Yamaha CDC-555 Owner's manual, 24 Seiten
CDC-665 Bedienungshandbuch   Yamaha CDC-665 Owner's manual, 26 Seiten
CDC-675 Bedienungshandbuch   Yamaha CDC-675 Owner's manual, 25 Seiten
501 Bedienungsanleitung   A-S701 / A-S501 / A, 7 Seiten
CD-S300 Bedienungshandbuch       Yamaha CD-S300 Owner`s manual [en] , 108 Seiten
TSX-112 Bedienungshandbuch       Yamaha TSX-112 Owner`s manual [pl] [ro] [sk] [sk] , 164 Seiten
CRW4416SX Bedienerhandbuch   Yamaha CRW4416SX Programming instructions, 20 Seiten
CD Recordable/Rewritable Drive CRW-F1-NB Technical Information   Yamaha CD Recordable/Rewritable Drive CRW-F1-NB Technical information, 35 Seiten
CDR400t Spezifikationen   Yamaha CDR400t Specifications, 40 Seiten
RX-V470 Bedienungsanleitung   0.95MB - NRPavs audio video services, 7 Seiten
CRW2200SX Einstellungsanleitung       Yamaha CRW2200SX Setup guide, 128 Seiten
CRW4261t-NB Betriebsanweisung   Yamaha CRW4261t-NB User guide, 25 Seiten
CDV-W901 Bedienungshandbuch   Yamaha CDV-W901 Owner's manual, 28 Seiten
DV-C6860 - DVD Changer Bedienungshandbuch   Yamaha DV-C6860 - DVD Changer Owner`s manual, 42 Seiten
CDX-470 Bedienungshandbuch   Yamaha CDX-470 Owner's manual, 18 Seiten
DV-S5550 Bedienungshandbuch   Yamaha DV-S5550 Owner`s manual, 27 Seiten
CDX-97 Wartungshandbuch    Yamaha CDX-97 Service manual [en] , 30 Seiten
580 Spezifikationen   Yamaha 580 Specifications, 38 Seiten