Bosch Rextroth TSplus Service Manual download pdf (Page 26)

Bosch Rexroth Corporation

R980 500 388 (6.2010) TSplus Carousel Basic Equipment Guide

11. Feed the chain onto

the drive sprockets

simultaneously; then, turn

the drive sprocket by hand.

Lower the chain around the

idler wheel so that the ends

of the respective chains can

be joined together.

12. Gauge and mark the chain

below the idler wheel so

that the chain loop will

just clear the idler wheel

after it is joined (Fig. 32).

The amount of slack below

the idler wheel should be

minimal.

13. Break the chain using the

chain breaker tool (See

Fig. 37 on page 28). Now

connect the two chain ends

with master link (See Fig.

33 or Fig. 36 on page 28).

14. Repeat the same for the

other side.

15. Reinstall the guide blocks

(See Fig. 26 on page 24)

and the top and inside

covers (See Fig. 13 on page

16).

Fitting the Flat-top Chain (cont.)

Fig. 32

Fig. 33

CAUTION!

Several pinch point hazards are present when the guards are removed. Keep

hands and loose clothing away from the module. Moving components such as

sprocket, drive shaft, gear reducer may result in serious injury!

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33 34

No comments

Bosch Rextroth TSplus Service Manual Page 26