12 | English
1 609 929 V19 | (20.7.11) Bosch Power Tools
Product Description and
Specifications
While reading the operating instructions, unfold the graphics
page for the vacuum cleaner and leave it open.
Intended Use
The vacuum cleaner is intended for vacuuming and extraction
of materials that are not hazardous to one’s health and for
non-flammable liquids. It is suitable for the increased de-
mands of industrial usage, as required in trades, industry and
workshops.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1 Cable holder
2 Carrying handle
3 Vacuum lid
4 Mode selector switch
5 Socket for power tool
6 Lock
7 Hose connection piece
8 Vacuum hose
9 Container
10 Caster brake
11 Latch of the vacuum cover
12 Accessory storage
13 Clamp for push handle
14 Push handle
15 Emptying device
16 Dust bag
17 Folded filter
18 Motor protection filter
19 Level sensors
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise Information
Measured values determined according to EN 60704.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with the fol-
lowing standards or standardization documents: EN 60335
and the directives 2006/42/EC, 2004/108/EC including
their amendments.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
01.06.2011
Assembly
f Before any work on the vacuum cleaner itself, pull the
mains plug.
Mounting the Handle
The vacuum cleaner cart is designed in such a manner, that
the vacuum cleaner can be pushed easier with the push han-
dle 14. Always grasp the push handle 14 with both hands
when pushing the vac.
Insert the push handle 14 into the 2 openings of the container
9. Push the clamps 13 through the corresponding holes of the
push handle 14 and then lock the clamps 13.
All-Purpose Vacuum Cleaner GAS 50
Professional
Article number
0 601 989 1..
Rated power input
W1200
Frequency
Hz 50/60
Container volume (gross)
l50
Net volume
l43
Dust bag contents
l21
Vacuum, max.*
hPa 248
Airflow, max.*
m
3
/h 220
Suction capacity
W 316 (6 mbar)
Surface of folded filter
cm
2
8600
Weight according to
EPTA-Procedure 01/2003
kg 17.2
Protection class
/I
Degree of protection
IP 24
* measured at the blower
The values given are valid for nominal voltages [U] of 230 V. For lower
voltage and models for specific countries, these values can vary.
Please observe the article number on the type plate of your vacuum
cleaner. The trade names of the individual vacuum cleaners may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-874-003.book Page 12 Wednesday, July 20, 2011 8:21 AM
(44 pages)
(12 pages)
(28 pages)
(494 pages)
(139 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals