Bosch WAU28460IN Installation Manual download pdf (Page 38)

en Setting the signal

38

M Setting the signal

Setting the signal

You can change the following settings:

■ The volume for the information

signals (e.g. at the end of the

program) and/or

■ The volume of the audible button

signals.

You will need to activate the setting

mode in order to change these settings.

Activate setting mode:

1. Set the program selector to

position 1. The washing machine is

switched on.

2. Press the A Start/Reload button

and, at the same time, turn the

program selector clockwise to

position 2.Release the button.

The setting mode is activated and the

preset volume for the information

signals appears in the display panel

(e.g. at the end of the program).

Changing the volume

Use the ñ Finished In button to change

the following settings at the

corresponding program selector

positions:

■ 2: The volume of the information

signals and/or

■ 3: The volume of the button signals.

Exiting setting mode

You can now end the process and set

the program selector to the Ú Off

position. The settings are saved.

H Sensors

Sensors

Unbalanced load detection

system

The automatic unbalanced load

detection system detects imbalances

and ensures even distribution of the

laundry by repeatedly starting and

stopping drum spinning.

If the laundry is extremely unevenly

distributed, the spin speed is reduced

or the spin cycle is not performed for

safety reasons.

Note: Place large and small items of

laundry evenly in the drum.

1/2/3/... positions on the program

selector









0 = off, 1 = quiet,

2 = medium, 3 = loud,

4 = very loud

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Comments to this Manuals

No comments