English - 1
The numbering of the machine elements refers to
the representation of the machine on the graph-
ics page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 On/Off switch
2 Thread for auxiliary handle
3 Hand guard*
4 Auxiliary handle
5 Cup brush*
6 Felt polishing disc*
7 Lambskin polishing bonnet*
8 Polishing sponge*
9 Round nut*
10 Sanding disc*
11 Rubber sanding plate*
12 Protective cap*
13 Fastening screw for protective cap*
14 Clamping nut*
15 Buffing disc*
16 Clamping flange*
17 Clamping mandrel*
18 Grinder spindle
19 Spindle lock button
20 Handle bracket*
21 Thumbwheel for speed preselection
(GPO 12 E)
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 90 dB (A); sound
power level: 103 dB (A).
Wear hearing protection!
The typically weighted acceleration is 5.5 m/s
2
.
The machine is intended to polish and brush
metal- and coated surfaces as well as for the pol-
ishing of stone without the use of water.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
■ Wear protective glasses and hearing protec-
tion.
■ Wear additional protection equipment for your
safety, such as protective gloves, sturdy
shoes, hard hat and apron.
■ The dust that is produced while working can be
detrimental to health, inflammable or explo-
sive. Suitable safety measures are required.
Examples: Some dusts are regarded as carci-
nogenic. Use suitable dust/chip extraction and
wear a dust respirator.
Tool Specifications
Polisher GPO 12
PROFESSIONAL
GPO 12 E
PROFESSIONAL
Order number 0 601 366 0.. 0 601 366 7..
Rated input power [W] 1 200 1 200
Output power [W] 700 700
No-load speed [rpm] 3 000 750 – 3 000
Sanding pad Ø, max. [mm] 230 230
Grinder spindle thread M 14 M 14
Weight without cable, approx. [kg] 3.3 3.5
Protection class / II / II
Please observe the order number of your machine. The trade names of the individual machines may vary.
Machine Elements Noise/Vibration Information
Intended Use
For Your Safety
1 609 929 392 -Buch Seite 1 Dienstag, 19. August 2003 4:49 16
8 • 1 609 929 392 • TMS • 18.08.03
Comments to this Manuals