Bosch Ake 35-19 S Operations Instructions download pdf (Page 30)

30 | English

F 016 L70 667 | (30.4.10) Bosch Power Tools

Mounting and Tensioning the Chain Saw

f Do not connect the chain saw to mains be-

fore it is completely assembled.

f Always wear protective gloves when han-

dling the chain.

Chain and Chain Bar Assembly (see figure A)

– Unpack all parts carefully.

– Align the 2 arrows on the chain-tensioning

ring 14 and the cover 16 ().

– Place the chain saw on any suitable flat sur-

face.

f Use only chains with a drive link thickness

of 1.1 mm.

– Slide the saw chain 11 in the slot around the

chain bar 12. Ensure the saw chain is in the

correct running direction by comparing the

saw chain with the rotation symbol 17. Take

care that the chain tensioning catch 23 faces

outward. The saw chain 11 is slid on easier

when holding the chain bar 12 vertical.

– Fit the chain links around the drive sprocket

18 and mount the chain bar 12 in such a man-

ner that the guide fins 20 in front and behind

the fastening bolt 21 engage into the keyway

of the chain bar 12.

– Check if all parts are seated properly and

hold the chain bar and the chain in this posi-

tion.

–Fit the cover 16 exactly, check that arrows

are still aligned and take care that the chain

catch bolt 22 engages into the groove of the

cover plate 16.

– Lightly tighten the cover 16 with the locking

knob 15.

– The chain is not yet tensioned. The saw chain

is tensioned as described in section “Ten-

sioning the Saw Chain”.

2216

OBJ_BUCH-1238-001.book Page 30 Friday, April 30, 2010 9:39 AM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 215 216

No comments

Bosch Ake 35-19 S Operations Instructions Page 30